Meridian America DSP33 manual Digital Loudspeaker System

Digital Loudspeaker System

To connect three or more DSP33 loudspeakers in a Meridian surround system

DSP33

Centre (master)

			CHANNEL
	OUTPUTINPUT		568 Digital Surround Processor
COMMS			COMMS DIGITAL OUTPUTS
DIGITAL	INPUTOUTPUT		M5 lead
		1	2
			511 S-patch box
			S5 lead (digital unused)	S5 lead

If your system includes more than two Meridian DSP loudspeakers you will need a 511 S-patch box (available separately) to link together the S5 leads from each speaker, as shown on the left.

● Use the comms part of an M5 lead to connect one of the

COMMS sockets on the Meridian Surround Controller to the

digital speaker you have chosen as the master (typically the

centre speaker).

● Use the audio part of the M5 lead to connect the digital

speaker to the appropriate digital output socket.

● Connect the COMMS output from the master digital speaker

to one socket on the 511 using an S5 lead.

● Link all the other digital speakers together using S5 leads, as

up the DSP33

DSP33 – Main R

DIGITAL COMMS

INPUT OUTPUT OUTPUT INPUT
1
2	CHANNEL

DSP33 – Main L

DIGITAL COMMS

INPUT OUTPUT OUTPUT INPUT
1
2	CHANNEL

shown in the illustration. The other sockets on the 511 can be

used to distribute the comms to each slave speaker.

● Use the duplicate sockets on each digital speaker to link the

speakers together in pairs, corresponding to the pairs of

Setting

S5 lead

channels on the digital outputs.

● Set the CHANNEL switch on the back of each speaker to the

appropriate position.

16