Connecting the digital loudspeakers
To connect two DSP33 loudspeakers in a Meridian system
562V Multimedia Controller
DIGITAL
COMMS OUTPUT
|
|
| M5 lead |
DSP33 – Main R | DSP33 – Main L | ||
DIGITAL | COMMS | DIGITAL | COMMS |
INPUT OUTPUT OUTPUT INPUT | INPUT OUTPUT OUTPUT INPUT | ||
1 |
| 1 |
|
2 | CHANNEL | 2 | CHANNEL |
|
| ||
S5 lead
You can connect two DSP33 loudspeakers directly to a Meridian DVD player, Meridian 568 Digital Surround Processor, Meridian 561 Digital Surround Controller, or Meridian 562V Multimedia Controller.
●Connect one of the COMMS sockets on the Meridian source or control unit, and the MAIN digital output, to one of the digital speakers using the M5 lead supplied.
●Link the two digital speakers together using the S5 lead supplied, as shown in the illustration.
●Set the CHANNEL switch to the appropriate position on each loudspeaker.
To use a DSP33 loudspeaker as a centre speaker
You can use a single DSP33 as a centre speaker in a Meridian surround system.
●Connect the speaker to the CENTRE digital output using an M5 lead, as shown in the previous illustration.
●Set the CHANNEL switch on the back of the loudspeaker to the LEFT/CENTRE position.
Setting up the DSP33 Digital Loudspeaker System
15