Meridian America DSP33 manual Unpacking, Radio interference

Page 15

Unpacking

Setting up the DSP33 Digital Loudspeaker System

The digital loudspeaker system is supplied in a box containing the following components:

❍DSP33 Loudspeaker(s) complete with grille.

❍Four self-adhesive feet per speaker.

❍This user guide.

❍Power cord suitable for your territory per speaker.

❍Meridian M5 lead.

❍Meridian S5 lead.

❍Meridian Configuration program.

❍RS232 cable.

❍R reset plug (see page 13).

❍Centre channel plinth (if ordered as a centre channel).

If any of these items is missing, please contact your dealer. We suggest that you retain the packaging carefully, as it provides maximum protection in transit.

Radio interference

FCC Warning: This equipment generates and can radiate radio frequency energy and if not installed and used correctly in accordance with our instructions may cause interference to radio communications or radio and television reception. It has been type-tested and complies with the limits set out in Subpart J, Part 15 of FCC rules for a Class B computing device. These limits are intended to provide reasonable protection against such interference in home installations.

EEC: This product has been designed and type-tested to comply with the limits set out in EN55013 and EN55020.

10

Image 15

Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Troubleshooting Configuring the DSP33 Loudspeakers using a ComputerIntroduction Digital Signal Processing DSP33 Digital Loudspeaker SystemDSP33 drivers Mounting options Power amplifiersMeridian High Resolution MHR CabinetMeridian Comms Meridian Digital Compact Theatre Sample configurationsOther applications DSP33 Digital Loudspeaker SystemSpecification Specification and accessoriesAvailable accessories Setting up the DSP33 Digital Loudspeaker System Radio interference UnpackingTo avoid overheating Safety warningsPositioning the digital loudspeakers To position the digital loudspeakersTo wall mount the digital loudspeakers To obtain the best soundConnecting the loudspeakers To reset the configuration of the digital loudspeakerBack panel Communications connections Digital connectionsConnecting the digital loudspeakers To connect two DSP33 loudspeakers in a Meridian systemTo use a DSP33 loudspeaker as a centre speaker Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System To switch to standby Selecting a sourceTo select a source Adjusting the volume To change the balance Adjusting the balance or phaseTo reset the balance to the centre To change the phaseConfiguring the DSP33 loudspeakers using a computer Meridian Configuration program To install the Meridian Configuration programRequirements Program Running the Meridian Configuration programTo connect the serial cable To select which loudspeaker to configureCreating a new settings file To display or edit the settings To display the settingsTo change the setup options Changing the setup optionsStart volume Setting up sources To set up sourcesTo configure the source options Loudspeakers using Advanced Completing the configuration To save the current settingsTo store the settings to the DSP33 loudspeaker Troubleshooting Troubleshooting Unit stays in standby light is dim Configuring the DSP33 does not have any effectGreen indicator on back panel is flashing Centre not workingSound is odd or mono Only the master loudspeaker playsService and guarantee ServiceGuarantee Troubleshooting Index Index