Meridian America DSP33 manual Completing the configuration, To save the current settings

Page 39

Configuring the DSP33 loudspeakers using a computer

Completing the configuration

The final stage in creating a settings file is to save it, and then	If the download was successful the DSP33 will switch itself to
store it to the speaker.	standby and the back-panel indicator will go dim.

To save the current settings

●Choose Save from the File menu or click the Save toolbar button, to save the changes you have made to the settings file to your PC hard disk.

To store the settings to the DSP33 loudspeaker

● Click the Store button.

The settings will then be downloaded and the back-panel indicator will flash.

As the download proceeds the following dialogue box shows its progress:

34

Image 39

Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Troubleshooting Configuring the DSP33 Loudspeakers using a ComputerIntroduction Digital Signal Processing DSP33 Digital Loudspeaker SystemDSP33 drivers Mounting options Power amplifiersMeridian High Resolution MHR CabinetMeridian Comms Meridian Digital Compact Theatre Sample configurationsOther applications DSP33 Digital Loudspeaker SystemSpecification Specification and accessoriesAvailable accessories Setting up the DSP33 Digital Loudspeaker System Radio interference UnpackingTo avoid overheating Safety warningsPositioning the digital loudspeakers To position the digital loudspeakersTo wall mount the digital loudspeakers To obtain the best soundConnecting the loudspeakers To reset the configuration of the digital loudspeakerBack panel Communications connections Digital connectionsConnecting the digital loudspeakers To connect two DSP33 loudspeakers in a Meridian systemTo use a DSP33 loudspeaker as a centre speaker Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System To switch to standby Selecting a sourceTo select a source Adjusting the volume To change the balance Adjusting the balance or phaseTo reset the balance to the centre To change the phaseConfiguring the DSP33 loudspeakers using a computer Meridian Configuration program To install the Meridian Configuration programRequirements Program Running the Meridian Configuration programTo connect the serial cable To select which loudspeaker to configureCreating a new settings file To display or edit the settings To display the settingsTo change the setup options Changing the setup optionsStart volume Setting up sources To set up sourcesTo configure the source options Loudspeakers using Advanced Completing the configuration To save the current settingsTo store the settings to the DSP33 loudspeaker Troubleshooting Troubleshooting Unit stays in standby light is dim Configuring the DSP33 does not have any effectGreen indicator on back panel is flashing Centre not workingSound is odd or mono Only the master loudspeaker playsService and guarantee ServiceGuarantee Troubleshooting Index Index