Meridian America DSP33 manual Positioning the digital loudspeakers, Safety warnings

Page 16

Positioning the digital loudspeakers

Safety warnings

Do not expose the speakers to dripping or splashing.

Do not place any object filled with liquid, such as a vase, on the speakers.

Do not place naked flame sources, such as lighted candles, on the speakers.

To position the digital loudspeakers

The DSP33 loudspeakers can be used either horizontally or vertically. If the DSP33 is mounted on a bookshelf, or mounted horizontally on top of a television, the feet should be attached as shown below. The best sound will only be obtained if the DSP33 is firmly mounted, and does not rock when pushed.

Setting

To avoid overheating

Do not position the speakers:

In direct sunlight.

Near heat sources, such as a radiator.

Directly on top of heat producing equipment, such as a power amplifier.

The DSP33 cabinet acts as a heatsink and requires adequate ventilation. Ensure that air can flow around it.

To avoid interference

Do not position the speakers:

Near strong magnetic radiation, such as near a power amplifier.

VerticalHorizontal

up the DSP33 Digital Loudspeaker System

11

Image 16
Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Configuring the DSP33 Loudspeakers using a Computer TroubleshootingIntroduction DSP33 Digital Loudspeaker System Digital Signal ProcessingDSP33 drivers Power amplifiers Meridian High Resolution MHRCabinet Mounting optionsMeridian Comms Sample configurations Meridian Digital Compact TheatreDSP33 Digital Loudspeaker System Other applicationsSpecification and accessories SpecificationAvailable accessories Setting up the DSP33 Digital Loudspeaker System Unpacking Radio interferenceSafety warnings Positioning the digital loudspeakersTo position the digital loudspeakers To avoid overheatingTo obtain the best sound To wall mount the digital loudspeakersTo reset the configuration of the digital loudspeaker Connecting the loudspeakersBack panel Digital connections Communications connectionsTo connect two DSP33 loudspeakers in a Meridian system Connecting the digital loudspeakersTo use a DSP33 loudspeaker as a centre speaker Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System Selecting a source To switch to standbyTo select a source Adjusting the volume Adjusting the balance or phase To reset the balance to the centreTo change the phase To change the balanceConfiguring the DSP33 loudspeakers using a computer To install the Meridian Configuration program Meridian Configuration programRequirements Running the Meridian Configuration program ProgramTo select which loudspeaker to configure To connect the serial cableCreating a new settings file To display the settings To display or edit the settingsChanging the setup options To change the setup optionsStart volume To set up sources Setting up sourcesTo configure the source options Loudspeakers using Advanced To save the current settings Completing the configurationTo store the settings to the DSP33 loudspeaker Troubleshooting Troubleshooting Configuring the DSP33 does not have any effect Green indicator on back panel is flashingCentre not working Unit stays in standby light is dimOnly the master loudspeaker plays Sound is odd or monoService Service and guaranteeGuarantee Troubleshooting Index Index