Meridian America DSP33 manual To display the settings, To display or edit the settings

Page 33

Configuring the DSP33 loudspeakers using a computer

To display the settings

●Double-click the Digital active loudspeaker icon, to open it and display the settings it contains.

The left-hand panel of the Meridian window will change to show the following two icons:

Settings is the initial configuration in the settings file.

Double-clicking Return to top level takes you back to the previous level.

To display or edit the settings

●Double-click the Settings icon.

The Meridian window will change to show the two categories of settings contained in the settings file: Sources and Setup.

The options available in each case are explained in the following sections.

At this stage you may find it useful to maximise the Meridian Configuration program window so you can see all the options on each screen.

28

Image 33

Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Troubleshooting Configuring the DSP33 Loudspeakers using a ComputerIntroduction Digital Signal Processing DSP33 Digital Loudspeaker SystemDSP33 drivers Meridian High Resolution MHR Power amplifiersCabinet Mounting optionsMeridian Comms Meridian Digital Compact Theatre Sample configurationsOther applications DSP33 Digital Loudspeaker SystemSpecification Specification and accessoriesAvailable accessories Setting up the DSP33 Digital Loudspeaker System Radio interference UnpackingPositioning the digital loudspeakers Safety warningsTo position the digital loudspeakers To avoid overheatingTo wall mount the digital loudspeakers To obtain the best soundConnecting the loudspeakers To reset the configuration of the digital loudspeakerBack panel Communications connections Digital connectionsConnecting the digital loudspeakers To connect two DSP33 loudspeakers in a Meridian systemTo use a DSP33 loudspeaker as a centre speaker Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System To switch to standby Selecting a sourceTo select a source Adjusting the volume To reset the balance to the centre Adjusting the balance or phaseTo change the phase To change the balanceConfiguring the DSP33 loudspeakers using a computer Meridian Configuration program To install the Meridian Configuration programRequirements Program Running the Meridian Configuration programTo connect the serial cable To select which loudspeaker to configureCreating a new settings file To display or edit the settings To display the settingsTo change the setup options Changing the setup optionsStart volume Setting up sources To set up sourcesTo configure the source options Loudspeakers using Advanced Completing the configuration To save the current settingsTo store the settings to the DSP33 loudspeaker Troubleshooting Troubleshooting Green indicator on back panel is flashing Configuring the DSP33 does not have any effectCentre not working Unit stays in standby light is dimSound is odd or mono Only the master loudspeaker playsService and guarantee ServiceGuarantee Troubleshooting Index Index