Meridian America DSP33 manual Advanced

Page 38

Advanced

Specify the Advanced options as follows:

●Select Poor digital audio source if you have difficulty locking to the source.

●If the source is connected to another Meridian unit, set Comms type to 1C for a Meridian CD player, 2C for a Meridian FM tuner, and 3C for a Meridian DVD player. Otherwise set it to None.

●If you have two Meridian source units of the same type you can configure them to have different Comms addresses. You can then select the appropriate source by specifying its Comms address in the Comms address field.

Configuring the DSP33 loudspeakers using a computer

33

Image 38

Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Configuring the DSP33 Loudspeakers using a Computer TroubleshootingIntroduction DSP33 drivers Digital Signal ProcessingDSP33 Digital Loudspeaker System Cabinet Power amplifiersMeridian High Resolution MHR Mounting optionsMeridian Comms Sample configurations Meridian Digital Compact TheatreDSP33 Digital Loudspeaker System Other applicationsSpecification and accessories SpecificationAvailable accessories Setting up the DSP33 Digital Loudspeaker System Unpacking Radio interferenceTo position the digital loudspeakers Safety warningsPositioning the digital loudspeakers To avoid overheatingTo obtain the best sound To wall mount the digital loudspeakersBack panel Connecting the loudspeakersTo reset the configuration of the digital loudspeaker Digital connections Communications connectionsTo use a DSP33 loudspeaker as a centre speaker Connecting the digital loudspeakersTo connect two DSP33 loudspeakers in a Meridian system Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System To select a source To switch to standbySelecting a source Adjusting the volume To change the phase Adjusting the balance or phaseTo reset the balance to the centre To change the balanceConfiguring the DSP33 loudspeakers using a computer Requirements Meridian Configuration programTo install the Meridian Configuration program Running the Meridian Configuration program ProgramTo select which loudspeaker to configure To connect the serial cableCreating a new settings file To display the settings To display or edit the settingsChanging the setup options To change the setup optionsStart volume To configure the source options Setting up sourcesTo set up sources Loudspeakers using Advanced To store the settings to the DSP33 loudspeaker Completing the configurationTo save the current settings Troubleshooting Troubleshooting Centre not working Configuring the DSP33 does not have any effectGreen indicator on back panel is flashing Unit stays in standby light is dimOnly the master loudspeaker plays Sound is odd or monoGuarantee Service and guaranteeService Troubleshooting Index Index