Meridian America Guide to Adjusting Volume on DSP33 Portable Speakers

Page 26

Adjusting the volume

The digital loudspeakers adjust the volume in precise steps of 1dB, where 9dB is equivalent to doubling the loudness, and can be varied in the range 1 to 99dB.

When you first connect power to the digital loudspeakers the volume is set to 65, which is similar to the midway position of the rotary volume control on a conventional preamplifier.

To restore the sound

Press Mute again on the remote.

Alternatively, the sound will be restored if you adjust the volume.

The back panel indicator on each speaker will go bright.

Using

To change the volume

Press the red A or V keys on the remote.

To mute the sound

Press Mute on the remote.

When the sound is muted the back panel indicator on each speaker is dimmed.

the DSP33 Digital Loudspeaker System

21

Image 26
Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Configuring the DSP33 Loudspeakers using a Computer TroubleshootingIntroduction DSP33 drivers Digital Signal ProcessingDSP33 Digital Loudspeaker System Cabinet Power amplifiersMeridian High Resolution MHR Mounting optionsMeridian Comms Sample configurations Meridian Digital Compact TheatreDSP33 Digital Loudspeaker System Other applicationsSpecification and accessories SpecificationAvailable accessories Setting up the DSP33 Digital Loudspeaker System Unpacking Radio interferenceTo position the digital loudspeakers Safety warningsPositioning the digital loudspeakers To avoid overheatingTo obtain the best sound To wall mount the digital loudspeakersBack panel Connecting the loudspeakersTo reset the configuration of the digital loudspeaker Digital connections Communications connectionsTo use a DSP33 loudspeaker as a centre speaker Connecting the digital loudspeakersTo connect two DSP33 loudspeakers in a Meridian system Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System To select a source To switch to standbySelecting a source Adjusting the volume To change the phase Adjusting the balance or phaseTo reset the balance to the centre To change the balanceConfiguring the DSP33 loudspeakers using a computer Requirements Meridian Configuration programTo install the Meridian Configuration program Running the Meridian Configuration program ProgramTo select which loudspeaker to configure To connect the serial cableCreating a new settings file To display the settings To display or edit the settingsChanging the setup options To change the setup optionsStart volume To configure the source options Setting up sourcesTo set up sources Loudspeakers using Advanced To store the settings to the DSP33 loudspeaker Completing the configurationTo save the current settings Troubleshooting Troubleshooting Centre not working Configuring the DSP33 does not have any effectGreen indicator on back panel is flashing Unit stays in standby light is dimOnly the master loudspeaker plays Sound is odd or monoGuarantee Service and guaranteeService Troubleshooting Index Index