Meridian America manual DSP33 Digital Loudspeaker System, Other applications

Page 11

Introduction

DSP33 Digital Loudspeaker System

DSP33

DSP33

Meridian DVD Player

512

The DSP33 can be connected directly to almost any source that provides a PCM SPDIF output, including CD or DVD players, some PC soundcards, and digital satellite decoders. The DSP33 includes a DSP volume control, and with Meridian sources this operates seamlessly via the 500 comms system.

Alternatively, the volume can be controlled with the Meridian System Remote using the optional 512 Remote Eye, or via the RS232 interface using the optional RS232 lead.

Other applications

Other applications include:

High-quality multimedia PC speakers with RS232 control of volume etc.

Surround speaker in a Meridian Digital Theatre (extra S5 lead required).

Main speaker in a Digital Music System with a Meridian CD Player (512 and D5 lead required).

Main speakers with another source of digital audio; eg satellite (512, D5 lead and MSR required).

Second zone speaker in a Meridian two-room plus system (long M5 lead, 512, D5 lead, and MSR required).

These applications may require additional accessories; for more information see Available accessories, page 8.

6

Image 11
Contents Meridian DSP33 Digital Loudspeaker System Meridian DSP33 Digital Loudspeaker System User Guide Sales and service in the UK Contents Troubleshooting Configuring the DSP33 Loudspeakers using a ComputerIntroduction DSP33 drivers Digital Signal ProcessingDSP33 Digital Loudspeaker System Mounting options Power amplifiersMeridian High Resolution MHR CabinetMeridian Comms Meridian Digital Compact Theatre Sample configurationsOther applications DSP33 Digital Loudspeaker SystemSpecification Specification and accessoriesAvailable accessories Setting up the DSP33 Digital Loudspeaker System Radio interference UnpackingTo avoid overheating Safety warningsPositioning the digital loudspeakers To position the digital loudspeakersTo wall mount the digital loudspeakers To obtain the best soundBack panel Connecting the loudspeakersTo reset the configuration of the digital loudspeaker Communications connections Digital connectionsTo use a DSP33 loudspeaker as a centre speaker Connecting the digital loudspeakersTo connect two DSP33 loudspeakers in a Meridian system Digital Loudspeaker System Loudspeaker System To use the DSP33 as a multimedia speaker with a PC Using the DSP33 Digital Loudspeaker System To select a source To switch to standbySelecting a source Adjusting the volume To change the balance Adjusting the balance or phaseTo reset the balance to the centre To change the phaseConfiguring the DSP33 loudspeakers using a computer Requirements Meridian Configuration programTo install the Meridian Configuration program Program Running the Meridian Configuration programTo connect the serial cable To select which loudspeaker to configureCreating a new settings file To display or edit the settings To display the settingsTo change the setup options Changing the setup optionsStart volume To configure the source options Setting up sourcesTo set up sources Loudspeakers using Advanced To store the settings to the DSP33 loudspeaker Completing the configurationTo save the current settings Troubleshooting Troubleshooting Unit stays in standby light is dim Configuring the DSP33 does not have any effectGreen indicator on back panel is flashing Centre not workingSound is odd or mono Only the master loudspeaker playsGuarantee Service and guaranteeService Troubleshooting Index Index