Ericsson LBI-38823C manual Turn on, Scn

Page 13

SV	EDACS - The Service flag is normally on to indicate
	service. If a no service condition occurs the SV flag
	and the No Service flag will be illuminated.
	GE-MARC - The Service flag is normally off. If an
	unsuccessful attempt is made to access a GE-
	MARC System, both the SV and the NO flags will
	turn on.
	CONVENTIONAL - The Service flag remains off at
	all times while operating in Conventional mode.
SCN	The Scan flag is on when Scan is activated.

SThe "S" flag is used to indicate two conditions. The "S" flag is used in conjunction with the "PC" flag to indicate the radio is in the Special Call mode. The "S" flag is also used to indicate when a trunked group is scan enabled.

PC	The "PC" flag is illuminated with the "S" flag to
	indicate the radio is in the Special Call mode. When
	the "PC" flag is illuminated without the "S" flag, the
	radio is in the Program mode.

1The "1" flag is used only for radio logical ID display. When receiving a call, the most significant digit (0 or 1) of the originating radio’s ID will be displayed by the "1" flag. When on, the ID of the originating radio begins with a 1.

13

Image 13

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Description SwitchControls ON/OFF PTT ButtonScan Model Keypad SPC HOME/ESCAN-A/D STOLock IndicatorsRCL Status Indicators System And Group/Channel IndicatorsBSY SCN Turn onLow Battery Standard Tones Power-UpCarrier Control Timer Alert TonesCall Queued Edacs Only Call ReceivedAutokey Edacs Only System BusyOut Of Range/System Inoperative Error MessagesIntrinsically Safe Usage Option # Description Options and AccessoriesPictured on Options And Accessories Battery Packs FM Approved Battery PacksInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Tips Operating ProceduresPage NICKEL-CADMIUM Battery Warranty Receiving a Message Edacs OperationSending a Message Squelch AdjustmentScan Model Radio Sending a Special CallSending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Scan Operation Enable/Disable ScanAdd/Delete Groups Wide Area And Priority System Scanning OptionalDtmf Overdial Dynamic Regrouping OptionalEmergency Operation Optional Receiving An Emergency Call HOME/EMERGENCY KEY DefinitionSending An Emergency Call Keypad Lock System Model Only HomeThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Wide Area System Scan Direct ModeReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Frequency Band OPERATOR’S Name Emergency Group Radio TypeSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers