Ericsson LBI-38823C Out Of Range/System Inoperative, Error Messages, Intrinsically Safe Usage

Page 16

Out Of Range/System Inoperative

EDACS - A single low pitched tone will sound immediately after the PTT switch is keyed indicating the radio is out of range of the repeater. The radio tries to place the call for a short period (3 seconds) after the initial attempt. The radio generates a second low pitched tone when it gives up trying to place the call. The system is off the air or the radio needs servicing when the radio is within calling range, and these tones are heard.

GE-MARC - Five beeps will sound shortly after the PTT switch is keyed when the radio is out of range of the repeater or the radio is inoperative. If the "Call Retry is active, the radio will try the channel at twenty second intervals for five minutes.

ERROR MESSAGES

E3 - If at anytime the Synthesizer is unable to load and lock on the channel properly an "E3" message will be displayed in the System field and the Group/Channel field will be blanked. If the "E3" message is displayed on all systems, the radio has failed or has not been programmed properly. The radio’s buttons and keys will still operate with an "E3" message displayed.

E9 - "E9" message indicates the Personality has not been programmed into the radio.

INTRINSICALLY SAFE USAGE

Selected portable radios with appropriate factory installed F4 Options are certified as Intrinsically Safe by the Factory Mutual Research Corporation. Intrinsically Safe approval includes Class I, II, III, Division 1 hazardous locations in the presence of Groups C, D, E, F and G atmospheres. Non-Incendive approval includes Class I, Division 2 hazardous locations in the presence of Groups A, B, C and D atmospheres.

Hazardous locations are defined in the National Electrical Code. Useful standards NFPA 437A and NFPA 437M for the classifications of hazardous areas can be ordered from the National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.

16

Image 16

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Switch DescriptionControls ON/OFF PTT ButtonScan Model Keypad HOME/E SPCSCAN-A/D STOLock IndicatorsRCL Status Indicators System And Group/Channel IndicatorsBSY Turn on SCNStandard Tones Power-Up Low BatteryCarrier Control Timer Alert TonesCall Received Call Queued Edacs OnlyAutokey Edacs Only System BusyOut Of Range/System Inoperative Error MessagesIntrinsically Safe Usage Option # Description Options and AccessoriesPictured on Options And Accessories Battery Packs FM Approved Battery PacksInstalling the Battery Pack Removing the Battery Pack Charging the Battery PacksInstalling the Battery Pack Rechargeable Battery Pack Disposal Swivel Mount Removal and ReplacementSwivel Mount Removal And Replacement Operating Procedures Operating TipsPage NICKEL-CADMIUM Battery Warranty Edacs Operation Receiving a MessageSquelch Adjustment Sending a MessageSending a Special Call Scan Model RadioSystem Model Radio Sending a Manually Entered Individual CallPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Enable/Disable Scan Scan OperationAdd/Delete Groups Wide Area And Priority System Scanning OptionalDynamic Regrouping Optional Dtmf OverdialEmergency Operation Optional Receiving An Emergency Call HOME/EMERGENCY KEY DefinitionSending An Emergency Call Home Keypad Lock System Model OnlyThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Wide Area System Scan Direct ModeReceiving a Message Sending a Message Sending a Manually Entered Interconnect Call Add/Delete ChannelsScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Radio Type Frequency Band OPERATOR’S Name Emergency GroupSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers