Ericsson LBI-38823C manual Home, Keypad Lock System Model Only

Page 39

2.The radio transmits an emergency message until an Emergency Channel Assignment is received.

3.Upon receipt, the radio begins operation on the programmed Sys- tem/Group (see the Home/Emergency Key Definitions section above).

4.Press the PTT bar and speak directly into the microphone in a normal voice.

5.Release the PTT bar when the transmission is complete and listen for a reply.

HOME

The radio can be programmed to automatically switch to a home System and/or Group by pressing and holding theHome/Emergency key for the programmed duration. The radio will also transmit an emergency mes- sage on the home System and/or Group if programmed (see the EMER- GENCY OPERATION section).

KEYPAD LOCK (SYSTEM Model Only)

The keypad can be locked at any time to prevent undesired key presses. To lock the keypad when it is in the unlocked state, press and release the LOCK (shifted 0) key. All buttons and keys except the VOLUME, PTT, HOME/EMER, SHIFT/CLR and LOCK (shifted 0) will now be inhibited. If the Emergency function of the HOME/EMER key is disabled, the HOME/EMER key will also be inhibited. If the key is programmed for Emergency or Emergency/Home, then the key is not inhibited and an emergency can still be declared on the Home System/Group or the current System/Group (however programmed).

39

Image 39

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model PTT Button SwitchDescription Controls ON/OFFScan Model Keypad STO HOME/ESPC SCAN-A/DIndicators LockRCL System And Group/Channel Indicators Status IndicatorsBSY SCN Turn onAlert Tones Standard Tones Power-UpLow Battery Carrier Control TimerSystem Busy Call ReceivedCall Queued Edacs Only Autokey Edacs OnlyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Tips Operating ProceduresPage NICKEL-CADMIUM Battery Warranty Receiving a Message Edacs OperationSending a Message Squelch AdjustmentScan Model Radio Sending a Special CallSending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Wide Area And Priority System Scanning Optional Enable/Disable ScanScan Operation Add/Delete GroupsDtmf Overdial Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation Optional Receiving An Emergency CallSending An Emergency Call Keypad Lock System Model Only HomeThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Frequency Band OPERATOR’S Name Emergency Group Radio TypeSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers