Ericsson LBI-38823C manual Scan Operation, Enable/Disable Scan, Add/Delete Groups

Page 36

SCAN OPERATION

Enable/Disable SCAN

To enable Group scanning, press and release the SCAN key. The "SCN" icon will illuminate to indicate scan is active. When scan is on, press and release the SCAN key to disable scan operation. The "SCN" icon will be extinguished when scan is turned off.

Add/Delete Groups

Groups can be added or deleted from the scan list as necessary. To add Groups to the scan list:

1.Select the desired Group to be added. If the current group is already included in the scan list, the "S" icon will be illuminated.

2.To add the group to the scan list, press the SHIFT/CLR key and then press the SCAN key. The "S" icon will illuminate and the group will be included.

NOTE

Scan must be disabled to add a Group to the scan list.

To delete Groups from the scan list:

1.Select the desired Group to be deleted. If the current group is already included in the scan list, the "S" icon will be illuminated.

2.To delete the group from the scan list, press the SHIFT/CLR button and then press the SCAN key. The "S" icon will turn off and the group will be removed from the scan list.

Wide Area And Priority System Scanning (Optional)

Dual Format PCS™ radios operating within an EDACS system may be programmed for Wide Area Scan operation for multi-site applications. Upon the loss of the currently selected system’s control channel, radios may be programmed to automatically scan other systems. If a new control

36

Image 36

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Switch DescriptionControls ON/OFF PTT ButtonScan Model Keypad HOME/E SPCSCAN-A/D STOIndicators LockRCL System And Group/Channel Indicators Status IndicatorsBSY Turn on SCNStandard Tones Power-Up Low BatteryCarrier Control Timer Alert TonesCall Received Call Queued Edacs OnlyAutokey Edacs Only System BusyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Removing the Battery Pack Charging the Battery PacksInstalling the Battery Pack Rechargeable Battery Pack Disposal Swivel Mount Removal and ReplacementSwivel Mount Removal And Replacement Operating Procedures Operating TipsPage NICKEL-CADMIUM Battery Warranty Edacs Operation Receiving a MessageSquelch Adjustment Sending a MessageSending a Special Call Scan Model RadioSystem Model Radio Sending a Manually Entered Individual CallPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Enable/Disable Scan Scan OperationAdd/Delete Groups Wide Area And Priority System Scanning OptionalDynamic Regrouping Optional Dtmf OverdialHOME/EMERGENCY KEY Definition Emergency Operation Optional Receiving An Emergency CallSending An Emergency Call Home Keypad Lock System Model OnlyThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Sending a Manually Entered Interconnect Call Add/Delete ChannelsScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Radio Type Frequency Band OPERATOR’S Name Emergency GroupSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers