Ericsson LBI-38823C manual Edacs Operation, Receiving a Message

Page 27

EDACS OPERATION

RECEIVING A MESSAGE

1.Turn the radio on by sliding the ON/OFF switch on the battery pack, to the ON position. A yellow area will be visible on the battery. After the radio has passed the power-up self test an optional tone will sound and the current System and Group will be displayed. If the unit does not pass the test, an error message will be displayed (see ERROR MESSAGES section) or the display will be blank.

2.Press the SHIFT/CLR button and then use the SELECT buttons s or t to select an EDACS system. The SYStem display will indicate the current System selected.

3.Use the SELECT buttons s or t to select the desired Group. The GRP display will indicate the current Group selected. The radio is now ready to receive messages.

4.INDIVIDUAL CALL - If an individual call (call directed only to your radio) is received, the radio unsquelches on the assigned channel and the "BSY" flag lights. If programmed on, the individual call received tones (one high followed by one low) will sound and the originator’s ID or just "id" (dependent upon programming) is displayed in the GRP and SYS fields.

GROUP CALL - When the radio receives a group call, it unsquelches on the assigned channel and lights the "BSY" flag. If programmed on, the group call received tone (single tone) will sound. The radio can also be programmed to display the Group name orginators ID in the GRP and SYS fields.

INTERCONNECT CALL - If an interconnect call (telephone call di- rected to your radio) is received, the radio unsquelches on the assigned channel and the "BSY" flag turns on. If programmed on, the intercon- nect call received tones (one high followed by one low) will sound. A "ph" will be displayed in the GRP field.

NOTE

The optional call received tones are programmed off by default.

27

Image 27

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model PTT Button SwitchDescription Controls ON/OFFScan Model Keypad STO HOME/ESPC SCAN-A/DIndicators LockRCL System And Group/Channel Indicators Status IndicatorsBSY SCN Turn onAlert Tones Standard Tones Power-UpLow Battery Carrier Control TimerSystem Busy Call ReceivedCall Queued Edacs Only Autokey Edacs OnlyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Tips Operating ProceduresPage NICKEL-CADMIUM Battery Warranty Receiving a Message Edacs OperationSending a Message Squelch AdjustmentScan Model Radio Sending a Special CallSending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Wide Area And Priority System Scanning Optional Enable/Disable ScanScan Operation Add/Delete GroupsDtmf Overdial Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation Optional Receiving An Emergency CallSending An Emergency Call Keypad Lock System Model Only HomeThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Frequency Band OPERATOR’S Name Emergency Group Radio TypeSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers