Ericsson LBI-38823C manual Sending a Manually Entered Individual Call

Page 45

number from the special call list, if no special calls are programmed then this field will be blank. Note this display is similar to the Special Call mode display except the "S" and "PC" icons are not illuminated.

2.The programmed call may now be sent following the procedure de- scribed in the section for the SCAN Model Radio.

Sending A Manually Entered Individual Call

1.Press the SPC key to put the radio into Special Call mode or "7" to put the radio into Conference Call mode. The SYStem field will display "SP" and the GRP (Group) field will display the last accessed call number from the preprogrammed Special Call selection. or will be blank if no Special Calls are programmed for this area. If the radio was put into Special Call mode the "S" and "PC" icons will be illumi- nated and if the radio was put into Conference Call mode the icons will be off.

2.Enter the tone set of the radio to be called. The first digit entered will cause the System field and the 10’s digit in the Group field to blank. The last digit entered will always be displayed in the 1’s digit of the Group display. Any previously entered digits will scroll left. Only four characters will be visible at a time with the leading character scrolling off the display upon each new key entry.

NOTE

To recall the last individual number entered manually from the key pad, press and hold the SHFT/CLR button and then press the RCL key.

3.Complete the tone set entry by pressing the # key. The # key indicates the digits entered are for an individual call. This will not be displayed but a tone will sound.

45

Image 45

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Description SwitchControls ON/OFF PTT ButtonScan Model Keypad SPC HOME/ESCAN-A/D STOIndicators LockRCL System And Group/Channel Indicators Status IndicatorsBSY SCN Turn onLow Battery Standard Tones Power-UpCarrier Control Timer Alert TonesCall Queued Edacs Only Call ReceivedAutokey Edacs Only System BusyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Tips Operating ProceduresPage NICKEL-CADMIUM Battery Warranty Receiving a Message Edacs OperationSending a Message Squelch AdjustmentScan Model Radio Sending a Special CallSending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Scan Operation Enable/Disable ScanAdd/Delete Groups Wide Area And Priority System Scanning OptionalDtmf Overdial Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation Optional Receiving An Emergency CallSending An Emergency Call Keypad Lock System Model Only HomeThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Frequency Band OPERATOR’S Name Emergency Group Radio TypeSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers