Ericsson LBI-38823C manual Sending a Manually Entered Interconnect Call

Page 46

4.Press and release the PTT bar to initiate the call. The radio performs the necessary signalling required to obtain a working channel.

5.When the signalling is successfully completed the "BSY" flag turns on and the Call Originate tones (three tone alert) sound. Press the PTT bar and speak directly into the microphone. Release the PTT bar as soon as you stop talking and wait for a reply. Messages cannot be received when the PTT bar is pressed.

The radio is out of range or the radio is inoperative when the signalling is unsuccessful, the "NO" and "SV" indicators are illuminated and a sequence of five beeps are heard at the speaker. Any subsequent attempt to initiate a call within the next 20 seconds will be ignored. The radio can be cleared from this mode by double clicking the SHFT/CLR button.

All channels are busy when the signalling is unsuccessful and a one second low frequency tone is heard at the speaker. The call will not be retried automatically.

NOTE

If the "Call Retry" option is active, the radio will try the channel at twenty second intervals for five minutes before returning to the normal System/Group display.

6.When the call is complete, double click the SHIFT/CLR button to exit the Special Call mode or Conference Call mode and return to the normal System/Group display.

Sending A Manually Entered Interconnect Call

1.Press the SPC key to put the radio into Special Call mode. or "7" to put the radio into Conference Call mode. The SYStem field will display

46

Image 46

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Controls ON/OFF SwitchDescription PTT ButtonScan Model Keypad SCAN-A/D HOME/ESPC STOLock IndicatorsRCL Status Indicators System And Group/Channel IndicatorsBSY Turn on SCNCarrier Control Timer Standard Tones Power-UpLow Battery Alert TonesAutokey Edacs Only Call ReceivedCall Queued Edacs Only System BusyOut Of Range/System Inoperative Error MessagesIntrinsically Safe Usage Option # Description Options and AccessoriesPictured on Options And Accessories Battery Packs FM Approved Battery PacksInstalling the Battery Pack Removing the Battery Pack Charging the Battery PacksInstalling the Battery Pack Rechargeable Battery Pack Disposal Swivel Mount Removal and ReplacementSwivel Mount Removal And Replacement Operating Procedures Operating TipsPage NICKEL-CADMIUM Battery Warranty Edacs Operation Receiving a MessageSquelch Adjustment Sending a MessageSending a Special Call Scan Model RadioSystem Model Radio Sending a Manually Entered Individual CallPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Add/Delete Groups Enable/Disable ScanScan Operation Wide Area And Priority System Scanning OptionalDynamic Regrouping Optional Dtmf OverdialEmergency Operation Optional Receiving An Emergency Call HOME/EMERGENCY KEY DefinitionSending An Emergency Call Home Keypad Lock System Model OnlyThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Wide Area System Scan Direct ModeReceiving a Message Sending a Message Sending a Manually Entered Interconnect Call Add/Delete ChannelsScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Radio Type Frequency Band OPERATOR’S Name Emergency GroupSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers