Ericsson LBI-38823C manual Enter the desired storage location number

Page 34

5.Press the STO key (shifted *) to complete the storage procedure.

6.Double click the SHIFT/CLR button to exit the Special Call mode and return to the normal System/Group display.

Recalling Manually Stored Individual And Interconnect Numbers

1.Press the # key to recall the individual call list or the * key to specify the interconnect call list. The screen will blank and a tone will sound.

2.Enter the desired storage location number (0-9).

3.Press the RCL (shifted #) key and the radio will switch to the Special Call mode. If the number is from the individual call list the ID number will be displayed. If the number is from the interconnect call list, the last four digits of the telephone number will be displayed.

If the memory location is blank the radio will sound a low pitch tone after the RCL is pressed.

4.Individual - Once the desired individual call number is displayed in the GRP (Group) field, press and hold the PTT to initiate the call. The radio performs the necessary signalling required to obtain a working chan- nel.

Interconnect - Once the desired interconnect special call number is displayed in the GRP (Group) field, press and release thePTT to initiate the call. The radio performs the necessary signalling required to obtain a working channel.

5.Individual - When the signalling is successfully completed the"TX" and "BSY" flags turn on and the Call Originate tone sounds. Speak directly into the microphone. Release the PTT bar as soon as you stop talking and wait for a reply.

34

Image 34

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Controls ON/OFF SwitchDescription PTT ButtonScan Model Keypad SCAN-A/D HOME/ESPC STOLock IndicatorsRCL Status Indicators System And Group/Channel IndicatorsBSY Turn on SCNCarrier Control Timer Standard Tones Power-UpLow Battery Alert TonesAutokey Edacs Only Call ReceivedCall Queued Edacs Only System BusyOut Of Range/System Inoperative Error MessagesIntrinsically Safe Usage Option # Description Options and AccessoriesPictured on Options And Accessories Battery Packs FM Approved Battery PacksInstalling the Battery Pack Removing the Battery Pack Charging the Battery PacksInstalling the Battery Pack Rechargeable Battery Pack Disposal Swivel Mount Removal and ReplacementSwivel Mount Removal And Replacement Operating Procedures Operating TipsPage NICKEL-CADMIUM Battery Warranty Edacs Operation Receiving a MessageSquelch Adjustment Sending a MessageSending a Special Call Scan Model RadioSystem Model Radio Sending a Manually Entered Individual CallPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Add/Delete Groups Enable/Disable ScanScan Operation Wide Area And Priority System Scanning OptionalDynamic Regrouping Optional Dtmf OverdialEmergency Operation Optional Receiving An Emergency Call HOME/EMERGENCY KEY DefinitionSending An Emergency Call Home Keypad Lock System Model OnlyThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Wide Area System Scan Direct ModeReceiving a Message Sending a Message Sending a Manually Entered Interconnect Call Add/Delete ChannelsScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Radio Type Frequency Band OPERATOR’S Name Emergency GroupSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers