Ericsson LBI-38823C manual HOME/EMERGENCY KEY Definition, Sending An Emergency Call

Page 38

HOME/EMERGENCY KEY DEFINITION

The Home/Emergency key can be programmed in one of the following configurations:

1.Emergency Enabled and Home Enabled - the radio will switch to the programmed home System and/or Group, and send an emergency transmission.

2.Emergency Enabled and Home Disabled - the radio will send an emergency transmission on the current System/Group.

3.Emergency Disabled and Home Enabled - the radio will switch to the home System and/or Group.

4.Emergency Disabled and Home Disabled - the key is not active.

EMERGENCY OPERATION (Optional)

Receiving An Emergency Call

If the radio receives an Emergency Channel Assignment, an alert tone will sound and the 10’s digit in the System field will alternate between displaying the digit and an "E".

Sending An Emergency Call

To enable an Emergency transmission:

1.Press and hold the Emergency key for the programmed duration. If programmed, an "E" will replace the 10’s digit in the System field and a alert tone will sound.

NOTE

The radio may be programmed for bothQuiet and/or Blind mode in which case no alert tone is heard and/or the display does not change respectively. If programmed to display an "E", the radio’s display will return to normal operation once the PTT is pressed.

38

Image 38

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Controls ON/OFF SwitchDescription PTT ButtonScan Model Keypad SCAN-A/D HOME/ESPC STORCL IndicatorsLock BSY System And Group/Channel IndicatorsStatus Indicators Turn on SCNCarrier Control Timer Standard Tones Power-UpLow Battery Alert TonesAutokey Edacs Only Call ReceivedCall Queued Edacs Only System BusyIntrinsically Safe Usage Error MessagesOut Of Range/System Inoperative Pictured on Options and AccessoriesOption # Description Options And Accessories Installing the Battery Pack Battery PacksBattery Packs FM Approved Removing the Battery Pack Charging the Battery PacksInstalling the Battery Pack Rechargeable Battery Pack Disposal Swivel Mount Removal and ReplacementSwivel Mount Removal And Replacement Operating Procedures Operating TipsPage NICKEL-CADMIUM Battery Warranty Edacs Operation Receiving a MessageSquelch Adjustment Sending a MessageSending a Special Call Scan Model RadioSystem Model Radio Sending a Manually Entered Individual CallPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Add/Delete Groups Enable/Disable ScanScan Operation Wide Area And Priority System Scanning OptionalDynamic Regrouping Optional Dtmf OverdialSending An Emergency Call HOME/EMERGENCY KEY DefinitionEmergency Operation Optional Receiving An Emergency Call Home Keypad Lock System Model OnlyThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Receiving a Message Direct ModeWide Area System Scan Sending a Message Sending a Manually Entered Interconnect Call Add/Delete ChannelsScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Radio Type Frequency Band OPERATOR’S Name Emergency GroupSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers