Ericsson LBI-38823C manual Conventional Mode Operation

Page 57

CONVENTIONAL MODE OPERATION

The procedures in the following section describes Conven- tional Mode operation. Each conventional channel may be programmed with one or more features such as Channel Guard or telephone interconnect capability. Follow these procedures if operating in a conventional system.

RECEIVING A MESSAGE

1.Turn the radio on by sliding the ON/OFF switch on the battery pack, to the ON position. A yellow area will be visible on the battery. After the radio has passed the power-up self test an optional tone will sound and the current System and Group/Channel will be displayed. If the unit does not pass the test, the display will be blank.

2.Press the SHIFT/CLR button and then use the SELECT buttons s or t to select a Conventional system. The SYStem display will indicate the current System selected.

3.Use the SELECT buttons s or t to select the desired Channel. The GRP icon will be surpressed but the field will still display the channel. The radio is now ready to receive messages.

4.Press the SHIFT/CLR button twice ("double click") to disable squelch and monitor the channel. Adjust the VOLUME buttons to the desired audio level.

5.When a message is received (and the correct Channel Guard signal is decoded, if programmed and enabled) the receiver will unsquelch and the message will be heard.

57

Image 57

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Description SwitchControls ON/OFF PTT ButtonScan Model Keypad SPC HOME/ESCAN-A/D STOIndicators LockRCL System And Group/Channel Indicators Status IndicatorsBSY SCN Turn onLow Battery Standard Tones Power-UpCarrier Control Timer Alert TonesCall Queued Edacs Only Call ReceivedAutokey Edacs Only System BusyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Tips Operating ProceduresPage NICKEL-CADMIUM Battery Warranty Receiving a Message Edacs OperationSending a Message Squelch AdjustmentScan Model Radio Sending a Special CallSending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Scan Operation Enable/Disable ScanAdd/Delete Groups Wide Area And Priority System Scanning OptionalDtmf Overdial Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation Optional Receiving An Emergency CallSending An Emergency Call Keypad Lock System Model Only HomeThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Frequency Band OPERATOR’S Name Emergency Group Radio TypeSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers