Ericsson LBI-38823C manual Call Received, Call Queued Edacs Only, Autokey Edacs Only, System Busy

Page 15

Call Received

If programmed, a single alert tone sounds when a group call is received and a two tone alert (one high followed by one low tone) is sounded for an individual call.

Call Queued (EDACS Only)

If one short, high pitched tone sounds after the transmitter is keyed, this indicates that the system has placed the request in a queue. This tone sounds at both the transmitting unit and the receiving unit(s), indicating to the user on the receiving end that they will receive a call shortly. If the PTT is unkeyed while in the queue, the radio will autokey (automatically key the PTT) when a channel becomes available (see AUTOKEY below).

Autokey (EDACS Only)

When the PTT is keyed to place a call on the system, but the PTT is released before getting to the channel (e.g. a queued call), the radio auto- matically keys on the channel when it gets the assignment. The radio generates a long beep and holds the transmitter keyed for two seconds. Pressing the PTT button keeps the channel and sends the message before this two second time-out has expired.

System Busy

EDACS - If you key the PTT bar and hear three short, medium pitched tones, this indicates that the receiving party is already engaged in another call or the system is busy and its queue is full. You must rekey later to access the system.

GE-MARC - If you key the PTT bar and hear a low frequency tone for 1 second this indicates all channels are busy.

Call Denied (EDACS Only)

A single low pitch beep will sound when the PTT switch is keyed and the request is denied by the system. This happens if the unit is an invalid user or if the unit is requesting an unavailable service.

15

Image 15

Contents Ericssonz Page Table of Contents Scan Operation Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model PTT Button SwitchDescription Controls ON/OFFScan Model Keypad STO HOME/ESPC SCAN-A/DIndicators LockRCL System And Group/Channel Indicators Status IndicatorsBSY SCN Turn onAlert Tones Standard Tones Power-UpLow Battery Carrier Control TimerSystem Busy Call ReceivedCall Queued Edacs Only Autokey Edacs OnlyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Tips Operating ProceduresPage NICKEL-CADMIUM Battery Warranty Receiving a Message Edacs OperationSending a Message Squelch AdjustmentScan Model Radio Sending a Special CallSending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Wide Area And Priority System Scanning Optional Enable/Disable ScanScan Operation Add/Delete GroupsDtmf Overdial Dynamic Regrouping OptionalHOME/EMERGENCY KEY Definition Emergency Operation Optional Receiving An Emergency CallSending An Emergency Call Keypad Lock System Model Only HomeThis page intentionally left blank GE-MARC Operation Sending a Message Scan Model Radio Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallScan must be disabled to add a channel to the scan list This page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar To delete Channels from the scan list Frequency Band OPERATOR’S Name Emergency Group Radio TypeSystem System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers