RADIO MODE
“SENS HI” means that the tuner is highly sensitive. “SENS LO” means it is set to the lower sensitivity setting.
➮Set the required sensitivity using the @ or # buttons 7.
When you have finished making your changes,
➮press the MENU button 8.
Tuning into stations manually
You can also tune into stations manually.
➮Press the @ or # button :.
Note:
●Different seek tuning sensitivities can be set separately for FM and AM repectively.
Storing stations
Storing stations manually
➮Select the required memory level (FM1, FM2 or FMT) or the AM frequency range.
➮Tune into the station.
➮Press one of the station buttons
1 - 6 9 for longer than 2 seconds to store the station to that button.
Storing stations automatically (Travelstore)
You can automatically store six stations with the strongest reception in the region. The stations are stored in the FMT or AM memory depending on the selected frequency range.
Note:
●Stations that were previously stored in this memory are deleted in the process.
➮Press and hold the
The station storing procedure begins. “FM TSTORE” or “AM TSTORE” appears in the display. After the process is completed, the station that is stored in location 1 of the respective memory level will be played.
Listening to preset stations
➮Select the memory level on which the station was stored.
➮Press the preset station button
1 - 6 9 of the station you want to listen to.
Scanning receivable stations (SCAN)
You can briefly listen in to all receivable stations by activating the scan function. You can set the scanning time to between 5 and 30 seconds in the menu.
Starting SCAN
➮Keep the MENU button 8 pressed until the scan process starts.
“SCAN” appears briefly in the display followed by the current frequency (which flashes).
Stopping SCAN and continuing listening to a station
➮Press the MENU button 8.
Scanning is stopped and the station that was tuned into last will remain active.
12