RADIO MODE | CD MODE |
Setting the scantime
➮Press the MENU button 8.
➮Keep pressing the fi or % button 7 until “SCAN TIME” appears in the display.
➮Set the required scantime using the @ or # buttons 7.
When you have finished making your changes,
➮press the MENU button 8twice.
Note:
●The set scantime also applies to scanning in CD and CD changer mode.
Setting the display
In radio mode, you have the option of continuously displaying the time or the frequency.
➮Keep the button 6pressed until the required display appears.
CD mode
You can use this unit to play standard audio CDs,
Risk of damage to the CD drive! Contoured CDs (shape CDs) are not suitable for playback in this unit.
We accept no liability for any damage to the CD drive or CD that may occur as a result of the use of unsuitable CDs.
Switching to CD mode
●If there is no CD inserted in the drive and the unit is playing Radio or CD Changer (AUX) mode,
➮press the button 1. The release panel opens.
➮Gently insert CD with the printed side uppermost into the drive until you feel some resistance.
The CD is drawn into the drive automatically.
You must not hinder or assist the drive as it draws in the CD.
➮Gently close the control panel whilst exerting a little pressure until you feel it clicks into place.
CD playback begins.
●If a CD is already inserted in the drive and the unit is playing Radio or CD Changer (AUX) mode.
➮Keep pressing the SRC button : until “CD” appears in the display.
Playback begins from the point at which it was last interrupted.
ENGLISH
13