■Using the Tuner
|
| JOG dial |
Number keys | 4 |
|
|
| |
| ¢ |
|
| TUNER BAND | PRESET |
TUNER BAND |
|
|
¢
4 | Band display, Frequency display, Preset channel |
English |
REMOTE CONTROL
Analog clock
You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage.
One Touch Radio (AC power only)—
Just press the TUNER BAND button to turn on the Unit and start playing the station you were last tuned to.
■You can also switch from any other sound source to the radio by pressing the TUNER BAND button.
Tuning In a Station
■1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the display.
Each time you press the button, the band changes as follows:
FM Auto FM MONO AM
■2. Select a station using one of the following methods.
■Manual Tuning
Press the 4or ¢button repeatedly to move from frequency to frequency until you find the station you want.
or
OR
■Auto Tuning
If you press and hold the 4 or ¢ button for one second or more, the frequency changes down, or up, automatically until a
station is found.
OR
■Preset Tuning using the Unit (Possible only after pre- setting stations)
Press the 7PRESET button to select the preset station.
After you have selected the preset number, the band and the fre- quency are displayed.
•Example:Press the 7PRESET button until the preset number 12 “P- 12” appears.
OR
(Display when using the Tuner)
■Preset Tuning using the Remote Control (Possible only after presetting stations)
Select the station by entering its preset number on the number keys.
•Example:For channel 5, press 5. For channel 15, press +10 then 5.
•The band and the frequency are displayed.
■3. Turn the antenna for best reception.
•For FM broadcast, extend and turn the telescopic antenna.
•For AM broadcast, turn the Unit itself.
For FM |
| For AM | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|