English |
Manual Presetting (Using the Re- mote Control) ———————————
Number key(s) (hold for 2 seconds)
■1. Select a band by pressing the TUNER
BAND button.
■2. Press the 4 or ¢ button to tune in a station.
■3. Set the preset number by pressing and hold- ing the number key on the Remote Control.
•To preset numbers 1 to 10: Press the number key and hold down for 2 seconds.
•To preset numbers 11 to 15: Press and release the +10 but-
ton, then press the second number key (1 to 5) and hold down for 2 seconds.
When the preset display blinks, the setting is stored and you can release the number key. The display returns to the normal band and frequency display.
Example: Preset number = 12
■4. Repeat steps 1 - 3 for each station.
To change the preset stations, repeat the same steps as above.
To Change the FM
Reception Mode
The “STEREO” indicator lights up and you can hear stereo effects, when a program is broadcast in stereo.
However if an FM stereo broadcast is hard to receive or noisy, you can select Monaural mode. Reception improves, but you lose any stereo effect.
Press the TUNER BAND button to select FM MONO mode.
The “MONO” indicator lights up on the display.
To restore the stereo effect, press the TUNER BAND button to select FM Auto mode. The “MONO” indicator goes out.
■Using the CD Player
JOG dial
Number keys |
REPEAT |
/8 |
| 4 |
CD holder | ¢ |
CD OPEN | 7 6 |
¢ | Playing time, Preset number |
| |
7 | Track number |
4 |
| CD indicator/ |
REMOTE CONTROL | Analog clock |
Repeat indicator |
|
|
| (Display when using the CD Player) |
|
|
| ||
|
|
You can use Normal or Repeat Play. Repeat Play can be set to repeat all or just one of the tracks on the CD.
One Touch CD Player
(AC power only) ——————————
■Just press the CD 6 button.
•The power is automatically turned on. If a CD is already inserted, “PLAY” is displayed and the CD will start play- ing from the first track.
•If no CD is inserted, “NO DISC” is displayed on the dis- play and the CD Player remains in Stop mode.
Normal Play
■1. Press the CD OPEN button on the Unit.
The CD holder opens.
■2. Place a CD, with its label side up. ■3. Gently close the CD holder by hand. ■4. Press the CD 6 button.
The first track of the CD begins playing.
The CD Player automatically stops when the last track of the CD has finished playing.
•During playback, the track number being played and the play-
back time elapsed are shown on the display. To stop playing the CD, press the 7 button. The following information for the CD is displayed.
Total number of tracks
Playback time elapsed
To pause, press the CD 6.
To cancel pause, press the CD 6 again. Play continues from the point where it was paused.
Notes:
•You can place an 8 cm (3'') CD without an adaptor.
•If the CD cannot be read correctly (because it is scratched, for example), “000000” appears on the display.
•Even if other function is selected during playing the CD, the last track is memorized.
6