CARD REMOTE
CONTROL
Names of parts
1TUNER button
2CD button
3AMS (Auto music sensor) rbutton
4AMS (Auto music sensor) tbutton
5PS (preset) button
6TUNING UP/DOWN buttons
7VOLUME
Preparations
A lithium battery is installed in the remote control at the factory.
Before you use the remote control, be sure to remove the insulating sheet by simply pulling it out.
Remote control (back)
Insulating sheet
Replacing the battery
1Insert the tip of a pointed object A into the hole B and pull out the battery holder to remove the lithium battery (CR2025).
Remote control (back)
Battery holder
2Install a new lithium battery (CR2025) with the ) side facing up in the battery holder.
3Push the battery holder into the unit until it clicks.
Note
When the infrared receptor on the main unit is exposed to direct sunlight, it may not respond to signals from the remote control.
CAUTION
•Lithium battery (CR2025) for the remote control Replace the battery with Hitachi Maxell, Panasonic or Sony Part No. CR2025 only. Use of another battery may present a risk of fire or explosion.
The battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire.
•Keep the lithium battery out of the reach of children. If swallowed, consult a doctor immediately.
•To prevent a short circuit, never pinch the battery with pliers, etc.
ENGLISH 10