Setting the beep tone
1Turn off the unit.
2Press and hold SEL until “BEEP” appears on the display.
3Turn Jog dial to select ON or OFF.
4Press SEL.
Setting the clock
1Press and hold DSPL until the clock indicator flashes on the display.
2Press +(to set hour) or - (to set minute), and then turn Jog dial.
3Press DSPL.
Displaying the clock
1Press DSPL.
To return to the former display, press DSPL again.
RADIO OPERATION
Tuning in to a station
(Seek/Manual Tuning)
1Press TU (TUNER) repeatedly to select the desired band (F1, F2, F3, A1, or A2).
2* Press + (to move to higher frequencies) or - (to move to lower frequencies) to tune in to a station. “ST” appears on the display when an FM station is broadcasting in stereo, and receiving conditions are good.
*Seek Tuning and Manual Tuning
•Press and hold + or - until Seek Tuning starts. The unit locates a station automatically (Seek Tuning).
To stop Seek Tuning, press +or -again.
•Press +or
Monaural mode
When FM signals become weak, or FM reception becomes poor, the unit automatically switches to Monaural mode to reduce noise.
Local mode
Local mode allows you to tune in only to strong stations during Seek Tuning.
1Press LO before you start seek tuning.
“LO” appears on the display.
To return to Distant mode, press LO again.
“LO” disappears and the unit tunes in to all receivable stations.
|
| Using preset stations | |
|
| You must preset stations before you can tune in to a | |
|
| station using preset station number buttons. | |
+/- | TU (TUNER) | LO |
|
Band indication* | Frequency indication |
| |
|
|
| |
|
| +/- | TU (TUNER) Preset station buttons 1 to 6 |
|
|
| PS/A.ME |
Local indicator | Stereo indicator |
| |
| Tuner indicator |
| |
* “F” means FM. |
|
| |
“A” means AM. |
| Preset station number | |
|
|
|
ENGLISH 4