Lincoln Electric LN-10 manual Problems Possible Recommended

Page 37

2. Damaged display p.c. board.

3. Damaged control p.c. board.

Displays & LEDʼs on keypad are off. 1. Damaged control p.c. board. The green or red LED on the control

p.c. board is blinking at a very fast or erratic rate.

CAUTION

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

LN-10

Displays & LEDʼs on keypad are off. The green and red LEDʼs on the con- trol p.c. board are both blinking at about one second intervals.

3. Damaged input power wiring in the LN-10 control box.

4. Damaged control p.c. board.

1. The connectors from the control p.c. board to the display p.c. board are loose or improperly inserted.

1. The display is in a mode that can only use one encoder.

One of the knobs changes the dis- play, but the other doesnʼt.

E-6	TROUBLESHOOTING	E-6
Observe all Safety Guidelines detailed throughout this manual

PROBLEMS	POSSIBLE	RECOMMENDED
(SYMPTOMS)	CAUSE	COURSE OF ACTION

2.The connector from the control p.c. board to the encoder p.c. boards may be loose or improper- ly inserted.

3.Damaged encoder p.c. board.

4.Damaged control p.c. board.

Neither knob changes the display.	1.	The connector from the control
		p.c. board to the encoder p.c.
		boards may be loose or improper-
		ly inserted.
	2.	Damaged control p.c. board.
	3.	Damaged encoder p.c. boards.
			If all recommended possible areas
			If all recommended possible areas
Displays & LEDʼs on keypad are off.	1.	Power source is off.	of misadjustment have been
The green and red LEDʼs on the			checked and the problem persists,
control p.c. board are off.	2.	Power source supply is not sup-	Contact your local Lincoln
		plying 42 VAC to the wire feeder	Authorized Field Service Facility.
		control box.

Image 37

Contents IM906 California Proposition 65 Warnings SafetyElectric Shock can kill Iii Welding and Cutting Sparks can Cause fire or explosionSûreté Pour Soudage a LʼArc Précautions DE SûretéOn-Line Product Registration Please Examine Carton and Equipment For Damage ImmediatelyTable of Contents General Description InstallationRecommended Processes and Equipment Available ModelsControl Speed Range Setting Wire Drive Speed Range SelectionSeries Wire Drive Ratio Selection Electrode RoutingProcedure to Install Drive Roll and Wire Guides Wire Feed Drive Roll KitsGUN and Cable Assemblies with Standard Connection GUN and Cable Assemblies with FAST-MATE Connection Series Wire Drive Water Connections for Water Cooled GunsGun Cable Connection with Standard Connection Gun Cable Connection with Fast-Mate ConnectionInput Cable LN-10 Control to Power Source Electrical InstallationGmaw Shielding Gas Dual Procedure Switch Options Optional Features InstallationSetup DIP Switch Access LN-10 Control DIP Switch SetupOperation Wire Drive Head Selection Setting the DIP SwitchesWelding Power Source Selection Step Trigger Mode Operation Selection Metric/English Wire Feed Speed Display SelectionRobotics Mode Selection Security Mode SelectionMaximum Limits Setting Mode Selection Minimum Limits Setting Mode SelectionKeypad and Display Operation Power-Down SaveKeypad and Display Description Operation KeysTrigger Mode Select Key Trigger Mode SelectionDisplay Control Keys Control Select key enables operator to Security ModeAcceleration Selection Digital Memory VoltmeterMaximum and Minimum Limits Setting Modes Wire Reel Loading READI-REELS, Spools or Coils Dual Procedure Remote Control K1449-1Drive Roll Pressure Setting Feeding Electrode and Brake AdjustmentGAS Guard Regulator Setting Procedure for Setting Angle of FeedplateMaking a Weld Wire Feed Overload Protection Wire Reel ChangingGrounding Lead Protector Display Prompt or Error Explanation of Prompting and Error MessagesAccessories K1449-1 Dual Procedure Remote Control K683-3 Dual Procedure SwitchK683-1 Dual Procedure Switch GUN Adapters for 10 Series Wire DriveGUN and Cable Assemblies K1634-3 Wire Reel Enclosure KIT K1558-1 Remote Switch Interface ModuleK1557-1 Swivel Mount K1556-1 Light Duty Caster KITWire Drive Motor and Gearbox MaintenanceGun and Cable Maintenance Drive Rolls and Guide TubesHOW to USE Troubleshooting Guide TroubleshootingContact your local Lincoln Authorized Field Service FacilityProblems Symptoms Recommended Course of Action Contact your local Lincoln Authorized Field Service Facility Troubleshooting Problems Possible Recommended Troubleshooting Voltage DIP switch S1 is incorrectly set for Electric Shock can kill Procedure for Replacing PC BoardsDiagrams 10-STT/ Wire DRI VE 18903 Dimension PrintLN-10 LN-10 Precaucion Warnung