Xantrex Technology 806-1054, 806-1840, 806-1055-02, 806-1544 manual Front Panel Freedom HF 1800 T

Freedom HF InvChg Owners Guide.book Page 5 Tuesday, April 29, 2014 12:10 PM

Front Panel (Freedom HF 1800 T)

Features

Front Panel (Freedom HF 1055 EMS,1800 EMS)

1

2

FREEDOM HF 1800 T

1	FREEDOM HF 1800 EMS
	Remote
2

12V	12V	Ignition
Power	Enable	Cont rol

FREEDOM HF

	STATUS
	Utility		Input Voltage (V)
	Battery	Select	Input Current (A)
FREEDOM HF 1800 EMS	Fault		Output Power (kW)

3a 4

TEST

TEST

RESET

RESET

3b 4

3a	TESTTEST RESET
4

RESET

3b 4

5

Feature	Description
1	Display panel displays inverter status and battery status information on the
	screen. The panel can be detached to expose the dip switches behind it and to
	extend and mount the panel on a wall or other location.
2	GFCI receptacles provide 1800 watts of power to operate AC devices. The
	GFCI unit can be detached and reinstalled to a separate location. Replace the
	GFCI unit with the GFCI blanking plate with knockout. The GFCI unit is also
	removed to access the AC wiring compartment for hard wiring the inverter to
	an existing AC power system.
3	(3a) Male PTIa Connector for plugging in a compatible AC Input cordset
	cable with a female PTI plug. (3b) Female PTI Connector for plugging in a
	compatible AC Output cordset cable with a male PTI plug.
4	Mounting flange allows you to mount the inverter permanently.

a.Phillips & Temro Industries manufactures accessories for heating, cooling, silencing, emis- sion and hybrid/electric vehicle technologies. The electrical cables with PTI connectors re- ferred to in this manual are custom cables that are available for the trucking industry.

Feature	Description
1	Power module contains 12-volt DC terminals for ignition controls, an
	auxiliary power source, and a remote port for attaching the display panel
	using a communications cable.
2	GFCI unit receptacles provide 1000 watts (1055 EMS) and 1800 watts
	(1800 EMS) of power to operate AC devices. The GFCI unit can be detached
	and reinstalled to a separate location. Replace the GFCI unit with the GFCI
	blanking plate with knockout. The GFCI unit is also removed to access the
	AC wiring compartment for hard wiring the inverter to an existing AC power
	system.
3	(3a) 18-inch (0.45m) AC Input electrical cord with 3-prong plug. (3b)
	Knockout for routing AC output wiring.
4	Mounting flange allows you to mount the inverter permanently.
5	Display panel displays inverter status and battery status information on the
	screen. Mount the panel on a wall or other location.

975-0390-01-01 5