Xantrex Technology 806-1840, 806-1055-02, 806-1544, 806-1054-01 Problem Possible Cause Solution

Page 55

Freedom HF InvChg Owners Guide.book Page 41 Tuesday, April 29, 2014 12:10 PM

 

 

 

Troubleshooting Reference

 

Table 8 Troubleshooting Reference

 

 

 

 

 

 

 

 

Problem

 

Possible Cause

Solution

 

 

 

 

 

 

No output voltage. The status LED is not

 

The jumper wire on the power module

Ensure the jumper wire is installed if the ignition control feature

 

lighting up.

 

panel connecting the “Ignition Control”

is not in use. If the ignition control feature is in use, ensure the

 

 

 

and “Disabled” terminals is removed

vehicle’s ignition is on.

 

 

 

and there is no ignition signal present.

 

 

 

 

 

 

 

The fan turns on and off during AC shore

 

• The battery is discharged and

Do not be alarmed, the unit is performing normally.

 

power mode.

 

demands high current from the

 

 

 

 

charger.

 

 

 

 

• AC pass-through current is high.

 

 

 

 

 

 

 

The fan turns on and off during inverter

 

The inverter is running continuously at

Do not be alarmed, the unit is performing normally. The fan is

 

mode.

 

high power.

activated automatically.

 

 

 

 

 

 

975-0390-01-01

41

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Freedom HF Inverter/Chargers Page Product Numbers Exclusion for DocumentationDocument Part Number Date and RevisionScope About This GuidePurpose Conventions UsedRelated Information Electrical Shock Hazard Important Safety InstructionsFire and Burn Hazard Precautions When Working With Batteries Exposure to Chemicals and Gases Hazard Regulatory Precautions for Using Rechargeable AppliancesKKK Information to the User FCC Information to the UserPage Contents Page Materials List IntroductionKey Features Low Mid High ModelFront Panel Freedom HF 1000, 1055, 1500 FeaturesDefault Setting Your Setting Feature DescriptionFront Panel Freedom HF 1055 EMS,1800 EMS Front Panel Freedom HF 1800 TSerial number of your unit Freedom HF 1055 EMS,1800 EMS Display Panel All Models Remote and Power Module PanelSide Panel All Models Setting Absorption Switch 1Switch Freedom Inverter/Charger ConfigurationSetting Battery Types on the Main Unit Battery Dip Switch Bulk FloatViewing Inverter/Charger Information Screen Adjusting Feature SettingsTo change the charger’s charging current setting To change the inverter mode setting To adjust the low battery shutdown setting Display Panel Operation Freedom Inverter/Charger OperationFreedom Inverter/Charger Operation Operating in Inverter Mode Operating in Shore Power ModeInverter Mode Setting is on Standby Energy Saver 25-hour Automatic Shut Offa Inverter Mode Setting is OFFLED Status LED During Inverter ModeOperating Several Loads at Once Checking Battery StatusChecking Output Power Turning the Audible Alarm on or OFFTransitioning from Inverter Mode to Shore Power Transitioning from Shore Power to Inverter ModeOperating Limits Power OutputInput Voltage Operating Voltage Range Comment Condition Freedom HF Only High Surge Loads Over-temperature ConditionsInverter Loads Overload ConditionsEquipment Damage Trouble LoadsVoltage Battery ChargingBattery Charging Flooded 14.4 13.5 Freedom HF Unit Routine MaintenanceBatteries Inverter Overload Operation Invert Power Derating vs. Ambient Temperature Invert Power Derating vs. Ambient Temperature Electrical Shock and Energy Hazard TroubleshootingBuzz in Audio Equipment Common ProblemsTelevision Reception  Error Code Condition Mode Action For error codes  to  Problem Possible Cause Solution Troubleshooting ReferenceAC shore power is not available or out Inverter was probably damaged due to the reverse Problem Possible Cause Solution Long Transfer Times Inverter ApplicationsResistive Loads Motor LoadsWatt models 1800-watt models SpecificationsDC Input AC Input Page Page Schneider Electric Solar Inverters USA Inc
Related manuals
Manual 64 pages 12.33 Kb
Top Page Image Contents