Xantrex Technology 806-1054-01, 806-1840, 806-1055-02 manual Status LED During Inverter Mode, Led

Freedom HF InvChg Owners Guide.book Page 19 Tuesday, April 29, 2014 12:10 PM

					Operating in Shore Power Mode
Status LED During Inverter Mode			Table 3 Status LED during Inverter Mode
The following summarizes the behavior of the Status LED during			Status	Display
Inverter mode.			LED	Screen	Condition
Table 3 Status LED during Inverter Mode			Solid RED	through	Fault condition detected and AC output
Status	Display				power is not available. The unit will sound
					an alarm and will shutdown completely
LED	Screen	Condition			within 30 secondsa. A five-minute delayed
					shutdown is available in some modelsb.
Solid	.	Select button is pressed to display Input
					See Table 7, “Error Codes Displayed on the
YELLOW	(where 12.8 is	Battery Voltage.			Display Panel Screen” on page 35.
	an example of	The Input Battery Voltage LED lights up.
			Off	Off	Inverter is OFF.
	battery	Value in display screen is shown as Volts.
	voltage)		Off (or	.	No communication between the Freedom
		Select button is pressed to display Input	Yellow)		HF and the Display Panel because the
	(where 11 is	Current.			battery voltage was too low to start the
	an example of	The Input Current LED lights up.			Inverter.
	current)	Value in display screen is shown as Amps.	a. Available in all models except Freedom HF 1500 and 1800 T. See page 22.
	.	Select button is pressed to display Output	b. Available only for the Freedom HF 1500 and 1800 T models. See page 23.
	(where 0.85 is	Power.
	an example of	The Output Power LED lights up.
	output power	Value in display screen is shown as
	in Kilowatts)	Kilowatts.
	through	Warning condition detected while AC
		output power is still available.
		See Table 7, “Error Codes Displayed on the
		Display Panel Screen” on page 35.
975-0390-01-01					19