Xantrex Technology 806-1054-01, 806-1840, 806-1055-02 manual Precautions When Working With Batteries

Page 8

Freedom HF InvChg Owners Guide.book Page vi Tuesday, April 29, 2014 12:10 PM

Precautions When Working With Batteries

BURN FROM HIGH SHORT-CIRCUIT CURRENT, FIRE AND EXPLOSION FROM VENTED GASES HAZARDS

Always wear proper, non-absorbent gloves, complete eye protection, and clothing protection. Avoid touching your eyes and wiping your forehead while working near batteries. See note #4.

Remove all personal metal items, like rings, bracelets, and watches when working with batteries. See notes #5 and #6 below.

Never smoke or allow a spark or flame near the engine or batteries.

Never charge a frozen battery.

Failure to follow these instructions can result in death or serious injury.

NOTES:

1.Mount and place the Freedom HF Inverter/Charger unit away from batteries in a well ventilated compartment.

2.Always have someone within range of your voice or close enough to come to your aid when you work near a lead-acid battery.

3.Always have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing, or eyes.

4.If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters your eye, immediately flood it with running cold water for at least twenty minutes and get medical attention immediately.

5.Use extra caution to reduce the risk or dropping a metal tool on the battery. It could spark or short circuit the battery or other electrical parts and could cause an explosion.

6.Batteries can produce a short circuit current high enough to weld a ring or metal bracelet or the like to the battery terminal, causing a severe burn.

7.When removing a battery, always remove the negative terminal from the battery first for systems with grounded negative. If it is grounded positive, remove the positive terminal first. Make sure all loads connected to the battery and all accessories are off so you don’t cause an arc.

vi

Freedom HF Owner’s Guide

Image 8
Contents Freedom HF Inverter/Chargers Page Exclusion for Documentation Document Part NumberDate and Revision Product NumbersAbout This Guide PurposeConventions Used ScopeRelated Information Important Safety Instructions Electrical Shock HazardFire and Burn Hazard Precautions When Working With Batteries Exposure to Chemicals and Gases Hazard Precautions for Using Rechargeable Appliances RegulatoryFCC Information to the User KKK Information to the UserPage Contents Page Introduction Materials ListKey Features Model Low Mid HighFeatures Default Setting Your SettingFeature Description Front Panel Freedom HF 1000, 1055, 1500Front Panel Freedom HF 1800 T Front Panel Freedom HF 1055 EMS,1800 EMSSerial number of your unit Display Panel All Models Remote and Power Module Panel Freedom HF 1055 EMS,1800 EMSSide Panel All Models Freedom Inverter/Charger Configuration Setting Battery Types on the Main UnitBattery Dip Switch Bulk Float Setting Absorption Switch 1SwitchViewing Inverter/Charger Information Adjusting Feature Settings ScreenTo change the charger’s charging current setting To change the inverter mode setting To adjust the low battery shutdown setting Freedom Inverter/Charger Operation Display Panel OperationFreedom Inverter/Charger Operation Inverter Mode Setting is on Standby Operating in Shore Power ModeOperating in Inverter Mode Inverter Mode Setting is OFF Energy Saver 25-hour Automatic Shut OffaStatus LED During Inverter Mode LEDChecking Battery Status Checking Output PowerTurning the Audible Alarm on or OFF Operating Several Loads at OnceTransitioning from Shore Power to Inverter Mode Transitioning from Inverter Mode to Shore PowerInput Voltage Power OutputOperating Limits Operating Voltage Range Comment Condition Freedom HF Only Over-temperature Conditions Inverter LoadsOverload Conditions High Surge LoadsTrouble Loads Equipment DamageBattery Charging VoltageBattery Charging Flooded 14.4 13.5 Batteries Routine MaintenanceFreedom HF Unit Inverter Overload Operation Invert Power Derating vs. Ambient Temperature Invert Power Derating vs. Ambient Temperature Troubleshooting Electrical Shock and Energy HazardTelevision Reception Common ProblemsBuzz in Audio Equipment Error Code Condition Mode Action  For error codes  to  Troubleshooting Reference Problem Possible Cause SolutionAC shore power is not available or out Inverter was probably damaged due to the reverse Problem Possible Cause Solution Inverter Applications Resistive LoadsMotor Loads Long Transfer TimesSpecifications Watt models 1800-watt modelsDC Input AC Input Page Page Schneider Electric Solar Inverters USA Inc
Related manuals
Manual 64 pages 12.33 Kb