Xantrex Technology 806-1840, 806-1055-02, 806-1544, 806-1054-01 Adjusting Feature Settings, Screen

Page 25

Freedom HF InvChg Owners Guide.book Page 11 Tuesday, April 29, 2014 12:10 PM

Freedom Inverter/Charger Configuration

Adjusting Feature Settings

The Power and Select buttons can be used to:

•change the charging current setting

•change the inverter mode setting

•disable or enable the audible alarm

•change the shutdown setting

•return to factory default settings

To cycle through the various feature settings:

1.Press and hold the Inverter Power button for five seconds to enter the feature settings mode.

2.Press the Inverter Power button to toggle between the following information:

Inverter

Power

Status	STATUS
Status
LED light

Utility

Battery

Fault

FREEDOM HF

Input Voltage(V)

Select Input Current (A)

Output Power (kW)

LED screen

	LED
Setting	Screen

Charging Current Setting	

Inverter Mode Setting	

Alarm Setting	

Shutdown Setting	

Factory Setting	

Info and Settings LED lights

Figure 3 Display Panel

975-0390-01-01

11

Image 25

Contents Freedom HF Inverter/Chargers Page Document Part Number Exclusion for DocumentationDate and Revision Product NumbersPurpose About This GuideConventions Used ScopeRelated Information Electrical Shock Hazard Important Safety InstructionsFire and Burn Hazard Precautions When Working With Batteries Exposure to Chemicals and Gases Hazard Regulatory Precautions for Using Rechargeable AppliancesKKK Information to the User FCC Information to the UserPage Contents Page Materials List IntroductionKey Features Low Mid High ModelDefault Setting Your Setting FeaturesFeature Description Front Panel Freedom HF 1000, 1055, 1500Front Panel Freedom HF 1055 EMS,1800 EMS Front Panel Freedom HF 1800 TSerial number of your unit Freedom HF 1055 EMS,1800 EMS Display Panel All Models Remote and Power Module PanelSide Panel All Models Setting Battery Types on the Main Unit Freedom Inverter/Charger ConfigurationBattery Dip Switch Bulk Float Setting Absorption Switch 1SwitchViewing Inverter/Charger Information Screen Adjusting Feature SettingsTo change the charger’s charging current setting To change the inverter mode setting To adjust the low battery shutdown setting Display Panel Operation Freedom Inverter/Charger OperationFreedom Inverter/Charger Operation Operating in Inverter Mode Operating in Shore Power ModeInverter Mode Setting is on Standby Energy Saver 25-hour Automatic Shut Offa Inverter Mode Setting is OFFLED Status LED During Inverter ModeChecking Output Power Checking Battery StatusTurning the Audible Alarm on or OFF Operating Several Loads at OnceTransitioning from Inverter Mode to Shore Power Transitioning from Shore Power to Inverter ModeOperating Limits Power OutputInput Voltage Operating Voltage Range Comment Condition Freedom HF Only Inverter Loads Over-temperature ConditionsOverload Conditions High Surge LoadsEquipment Damage Trouble LoadsVoltage Battery ChargingBattery Charging Flooded 14.4 13.5 Freedom HF Unit Routine MaintenanceBatteries Inverter Overload Operation Invert Power Derating vs. Ambient Temperature Invert Power Derating vs. Ambient Temperature Electrical Shock and Energy Hazard TroubleshootingBuzz in Audio Equipment Common ProblemsTelevision Reception  Error Code Condition Mode Action For error codes  to  Problem Possible Cause Solution Troubleshooting ReferenceAC shore power is not available or out Inverter was probably damaged due to the reverse Problem Possible Cause Solution Resistive Loads Inverter ApplicationsMotor Loads Long Transfer TimesWatt models 1800-watt models SpecificationsDC Input AC Input Page Page Schneider Electric Solar Inverters USA Inc

Related manuals

Manual 64 pages 12.33 Kb