Hitachi C 8FSHE, C 8FSE specifications Armature assy and lock lever

Page 33

4. Armature ass'y and lock lever

(1)Remove the Brush Cap [161] and the Carbon Brush [160].

(2)Removing the three Machine Screws (W/Washers) M5 x 40 (Black) [157] allows you to remove the Housing Ass’y [155] together with the Handle Cover [164] from the Gear Case [198].

(3)Remove the Lock Lever [177] and the Spring [176].

(4)Remove the two Special Screws M6 [205] and remove the Lock Lever [204] and the Lock Lever Spring [203].

(5)Disassembly of the Armature Ass'y [187]

(a)Remove the Housing Ass'y [155] from the Gear Case [198] according to the above step 4-(1)(2). If the Rubber Bushing [186] stays in the Housing Ass’y [155], remove it with long nose pliers.

(b)Remove the Armature Ass'y [187] by gently hammering the Gear Case [198] with a plastic hammer.

Fig. 42

-30-

Image 33

Contents Models C 8FSE, C 8FSHE Remark Contents Laser marker Only the Model C 8FSHE Selling Point DescriptionsPositive angle stoppers Slide cutting Miter cutting Compound miter and bevel cutting Specifications Specifications· 216 mm 8-1/2 TCT saw blade 15.9 mm 5/8 bore, NT24 Specification comparisons Comparisons with Similar ProductsFor Europe and others Except for the U.S.A and Canada C8FSE/C8FSHE 8FB2 Right angle For the U.S.A and CanadaFull-load current a 9.2 a Safety instructions Precautions in Sales PromotionPage Laser marker only the Model C 8FSHE Relative standardsAmbient illuminance and visibility of laser line Precautions concerning brakeAdjustment and Operational Precautions Confirmation for use of sub fence Optional accessoryConfirmation of saw blade lower limit position Position adjustment of laser line Only the Model C 8FSHE Adjustment of table insert position How to use the vise assemblyCutting operation Page Bevel scale Clamp lever Tighten Crown molding stopper R Page Adjustment of Components Bevel angle adjustmentBall bushing Linear bearing Packing Precautions in disassembly and reassembly Repair GuideTurn table and base assy Page Then remove the Lower Guard 215 from the Bearing Holder Lower guard, link, spindle assy and dust guidePage Armature assy and lock lever Page Vise ass’y Laser markerSpecial attention ReassemblyWiring diagram Page Page Page Reassembly requiring adjustment Checking of insulation distanceNo-load current Product precision LubricationAdjustment of laser marker accuracy Page Page 211 Troubleshooting guideBushing 115 and slide Page 160 107 8FSHE Standard Repair Time Unit Schedules8FSE Slide Compound SAW 8FSHE 501 Parts SUB Fence For USA, can Nylon Clip Ball Bearing 608VVC2PS2L Standard Accessories Model C 8FSE 8FSE 162 153 152 8FSE Scale a For USA, can Carbon Brush 1 Pair For GBR 110V, USA, CAN, VEN, TPE Lock Lever Spring Includ 626