Hitachi C 8FSHE, C 8FSE specifications Miter cutting

Miter cutting

			Table 4			Unit: mm (inch)
Max.	Maker	HITACHI
	Model
				P1 and P2	P3	B
cutting		C 8FSE
			C 8FB2
dimension		C 8FSHE
Right and		65 x 220
		(2-9/16” x 8-21/32”)
left 45°		75 x 185	65 x 220	60 x 190	70 x 212	60 x 190
Height x Width		(2-15/16” x 7-1/4”)	(2-9/16” x 8-21/32”)	(2-3/8” x 7-15/32”)	(2-3/4” x 6-11/32”) (2-3/8” x 7-15/32”)
(H x W)		with aux. board
		width 20 (13/16”)
		65 x 170
Right 57°		(2-9/16” x 6-11/16”)
		75 x 140	65 x 175		70 x 160	60 x 155
Height x Width				-
		(2-15/16” x 5-1/2”)	(2-9/16” x 6-7/8”)		(2-3/4” x 6-5/16”)	(2-3/8” x 6-3/32”)
(H x W)		with aux. board
		width 20 (13/16”)

Wide workpieces as wide as shown in Table 4 can be cut by swiveling the turn table (right and left).

The maximum cutting dimensions in [ ] in Table 4 are those obtained by adjusting the lower limit position of the saw blade indicated in Fig. 6-b, also with an auxiliary board.

Fig. 8

Right and left bevel cutting

			Table 5			Unit: mm (inch)
Max.	Maker	HITACHI
	Model
				P1 and P2	P3	B
cutting		C 8FSE	C 8FB2
dimension		C 8FSHE
		45 x 312
Left 45°		(1-25/32” x 12-1/4”)
		50 x 252	45 x 305	48 x 270	50 x 300	42 x 270
Height x Width
		(1-15/16” x 9-15/16”)	(1-25/32” x 12”)	(1-7/8” x 10-3/8”)	(1-15/16” x 11-13/16”)	(1-21/32” x 10-3/8”)
(H x W)		with aux. board
		width 30 (1-3/16”)
		60 x 312
Right 5°		(2-9/16” x 12-1/4”)
		70 x 252
Height x Width			-	-	-	-
		(2-3/4” x 9-15/16”)
(H x W)		with aux. board
		width 30 (1-3/16”)
	Fig. 9

-4-