Hitachi C 8FSHE, C 8FSE specifications Laser marker, Vise ass’y

Page 35

6. Laser marker

(1)Remove the Machine Screw M4 x 8 [81] and remove the Cover [83] from the rear of Hinge (A) Ass’y [87].

(2)Remove the three Machine Screws M4 x 8 [108] and remove Plate (A) [105] and Cover (A) [104] from Hinge (A) Ass’y [87].

(3)Remove the Adjuster [88] and push the Clutch Screw [96] from behind Hinge (A) Ass’y [87]. Then Holder (B) [106] can be removed together

with the Laser Marker [107].

NOTE: At this time, the Spring [100] and the Clutch Spring [101] pop out. Be careful not to lose them.

(4)Remove the Clutch Screw [96]. Then the Laser Marker [107] can be removed from Holder (B)

[106].

NOTE: At this time, the two Springs [102] pop out. Be careful not to lose them.

Fig. 44

7. Vise ass’y

(1)Remove the Wing Bolt M6 x 15 [36] to remove the Vise Shaft [39].

(2)Remove the Machine Screw M4 x 10 [41] to remove the Vise Plate [40].

(3)Remove the Knob Bolt M10 x 66 [35] from the Screw Holder [37].

Fig. 45

-32-

Image 35

Contents Models C 8FSE, C 8FSHE Remark Contents Laser marker Only the Model C 8FSHE Selling Point DescriptionsPositive angle stoppers Slide cutting Miter cutting Compound miter and bevel cutting Specifications Specifications· 216 mm 8-1/2 TCT saw blade 15.9 mm 5/8 bore, NT24 For Europe and others Except for the U.S.A and Canada Specification comparisonsComparisons with Similar Products C8FSE/C8FSHE 8FB2 Right angle For the U.S.A and CanadaFull-load current a 9.2 a Safety instructions Precautions in Sales PromotionPage Laser marker only the Model C 8FSHE Relative standardsAmbient illuminance and visibility of laser line Precautions concerning brakeConfirmation of saw blade lower limit position Adjustment and Operational PrecautionsConfirmation for use of sub fence Optional accessory Position adjustment of laser line Only the Model C 8FSHE Adjustment of table insert position How to use the vise assemblyCutting operation Page Bevel scale Clamp lever Tighten Crown molding stopper R Page Ball bushing Linear bearing Adjustment of ComponentsBevel angle adjustment Packing Turn table and base assy Precautions in disassembly and reassemblyRepair Guide Page Then remove the Lower Guard 215 from the Bearing Holder Lower guard, link, spindle assy and dust guidePage Armature assy and lock lever Page Vise ass’y Laser markerSpecial attention ReassemblyWiring diagram Page Page Page No-load current Reassembly requiring adjustmentChecking of insulation distance Product precision LubricationAdjustment of laser marker accuracy Page Page 211 Troubleshooting guideBushing 115 and slide Page 160 107 8FSHE Standard Repair Time Unit Schedules8FSE Slide Compound SAW 8FSHE 501 Parts SUB Fence For USA, can Nylon Clip Ball Bearing 608VVC2PS2L Standard Accessories Model C 8FSE 8FSE 162 153 152 8FSE Scale a For USA, can Carbon Brush 1 Pair For GBR 110V, USA, CAN, VEN, TPE Lock Lever Spring Includ 626