Hitachi EC 16, EC 12, EC 6B, EC 6C instruction manual Replacement Parts

Page 5

Have defective pressure switches replaced by authorized service center.

Do not use compressor if switch does not turn it on and off.

17.NEVER USE COMPRESSOR FOR APPLICATIONS OTHER THAN THOSE SPECIFIED.

Never use compressor for applications other than those specified in the Instruction Manual.

18.HANDLE COMPRESSOR CORRECTLY.

Operate the compressor according to the instructions provided herein. Never allow the compressor to be operated by children, individuals unfamiliar with its operation or unauthorized personnel.

19.KEEP ALL SCREWS, BOLTS AND COVERS TIGHTLY IN PLACE.

Keep all screws, bolts, and covers tightly mounted. Check their conditions periodically.

20.KEEP MOTOR AIR VENT CLEAN.

The motor air vent must be kept clean so that air can freely flow at all times. Check for dust build-up frequently.

21.OPERATE COMPRESSOR AT THE RATED VOLTAGE.

Operate the compressor at voltages specified on their nameplates.

If using the compressor at a higher voltage than the rated voltage, it will result in abnormally fast motor revolution and may damage the unit and burn out the motor.

22.NEVER USE A COMPRESSOR WHICH IS DEFECTIVE OR OPERATING ABNORMALLY.

If the compressor appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center.

23.DO NOT WIPE PLASTIC PARTS WITH SOLVENT. Solvents such as gasoline, thinner, benzine, carbon tetrachloride, and alcohol may damage and crack plastic parts. Do not wipe them with such solvents. Wipe plastic parts with a soft cloth lightly dampened with soapy water and dry thoroughly.

English

24.USE ONLY GENUINE HITACHI REPLACEMENT PARTS. Replacement parts not manufactured by Hitachi may void your warranty and can lead to malfunction and resulting injuries. Genuine Hitachi parts are available from your dealer.

25.DO NOT MODIFY THE COMPRESSOR.

Do not modify the compressor. Always contact the Hitachi authorized service center any repairs. Unauthorized modification may not only impair the compressor performance but may also result in accident or injury to repair personnel who do not have the required knowledge and technical expertise to perform the repair operations correctly.

26.TURN OFF THE PRESSURE SWITCH WHEN THE COMPRESSOR IS NOT USED.

When the compressor is not used, turn the knob of the pressure switch OFF, disconnect it from the power source and open the drain cock to discharge the compressed air from the air tank.

27.NEVER TOUCH HOT SURFACE.

To reduce the risk of burns, do not touch tubes, heads, cylinder and motors.

28.DO NOT DIRECT AIR STREAM AT BODY.

Risk of injury, do not direct air stream at persons or animals.

29.DRAIN TANK.

Drain tank daily or after 4 hours of use. Open drain fit- ting and tilt compressor to empty accumulated water.

30.DO NOT STOP COMPRESSOR BY PULLING OUT THE PLUG.

Use the “AUTO/OFF” knob of pressure switch.

31.USE ONLY RECOMMENDED AIR HANDLING PARTS ACCEPTABLE FOR PRESSURE NOT LESS THAN 125 PSI (8.6 BAR)

Risk of bursting. Use only recommended air handling parts acceptable for pressures not less than 125 psi (8.6 bar).

REPLACEMENT PARTS

When servicing use only identical replacement parts.

Repairs should be conducted only by a Hitachi authorized service center.

— 5 —

Image 5
Contents Avertissement Modèlemodelo EC 6B EC 6C EC 12 ECSafety Operation and MaintenanceSécurité Utilisation ET EntretienImportant Information Meanings of Signal WordsSafety Replacement Parts Extension Cord Grounding InstructionsMake Them Available to Other Users of this Tool Name of Parts Operation and MaintenanceAccessories SpecificationsStandard Accessories ApplicationsOperation Prior to OperationCleaning the intake filter MaintenanceShutdown About the thermal protectorOil change-oil topping off Service and RepairsDraining tank Informations Importantes Signification DU Vocabulaire DE SignalisationBien Lire Toutes LES Instructions SécuritéPièces DE Rechange Cordon DE Rallonge Instructions DE Mise À LA TerreFrançais Remarque Utilisation ET EntretienNOM DES Pièces Spécifications Accessoires AvertissementAccessoires Standards Utilisation Avant L’UTILISATIONArrêt EntretienPropos du protecteur thermique Nettoyage du filtre d’admissionChangement d’huile/Débordement d’huile Service APRÈS-VENTE ET RéparationsVidange du réservoir Significado DE LAS Palabras DE Señalización Información ImportanteLEA Todas LAS Instrucciones SeguridadPiezas DE Reemplazo Cable Prolongador Instrucciones Para LA Puesta a TierraEspañol Nota Operación Y MantenimientoNomenclatura Accesorios Advertencia EspecificacionesAccesorios Estandard AplicacionesOperación Antes DE LA OperaciónCierre MantenimientoAcerca del protector térmico Limpieza del filtro de entradaCambio-rellenado de aceite Servicio Y ReparacionesDrenaje del depósito Español EC6B OLD EC6C EC6C EC12 7150791000 EC16 160182 7012330000 881-686 Page Page 810