Powerware 685, 1085 installation manual Important Safety Instructions

Page 2

IMPORTANT SAFETY INSTRUCTIONS

Instructions Importantes Concernant La Sécurité

SAVE THESE INSTRUCTIONS

Conserver Ces Instructions

This manual contains important instructions for your battery system. You should follow these instructions during the installation and maintenance of the battery cabinets.

Cette notice contient des instructions importantes

concernant la sécurité.

The installation of battery cabinets should be performed or supervised by personnel knowledgeable of batteries and their associated precautions. Keep unauthorized personnel away from battery cabinets.

Observe these precautions when working on or around battery cabinets:

Remove watches, rings, or other metal objects.

Use tools with insulated handles.

Wear rubber gloves and boots.

Do not lay tools or metal parts on top of batteries or battery cabinets.

Disconnect the charging source prior to connecting or disconnecting terminals.

The battery cabinet frame is not referenced to the DC circuit.

When replacing batteries, use the same number and type of sealed, lead-acid batteries.

Refer to local codes for proper disposal requirements for used batteries.

CAUTION:

Do not dispose of battery or batteries in a fire.

The battery may explode.

CAUTION:

Do not open or mutilate the battery or batteries.

Released electrolyte is harmful to the skin and eyes, and may be toxic.

CAUTION:

A battery can cause electrical shock, burn from high short-circuit current, or fire.

Observe proper precautions.

ii

Powerware 9350 Series 685 and 1085 Auxiliary Battery Cabinets

 

Installation Manual 164201408 Rev. P00 053002

Image 2
Contents Series 685 Auxiliary Battery Cabinets Important Safety Instructions General Notes About Installing Battery Cabinets Conventions Used in This Manual Table of Contents Typical Battery Cabinets Typical Battery Cabinets IntroductionIdentification of Your Battery System UPSBattery Cabinets For More Information Getting HelpPreparing Your Site Unpacking Your Battery CabinetPreparing for Wiring the Battery Cabinet Environmental ConsiderationsInspecting and Unpacking Each Cabinet Outer Packaging PLY---FOAM CushionsUnloading the Battery Cabinet from the Pallet Removing Front and Rear Supports Creating an Installation Plan Page Connecting to Powerware 9350 30 Powerware 9350 UPS with Integral Battery CabinetsInstallation Manual 164201408 Rev. P00 See for Series TOP View Front View Attaching UPS Base to Series 685 Base Installation Manual 164201408 Rev. P00 Series 685 Battery Cabinet Wiring Detail Series 685 Cabinet Series 1085 Battery Cabinet Wiring Detail Powerware 9350 UPS with Separately Located Battery Cabinets UPS with Separately Located Battery CabinetsSeparate Installation of Series 685 Battery Cabinets Connecting Two Series 685 Bases Separate Installation of Series 1085 Battery Cabinets Connecting Two Series 1085 Bases To Electrically Connect Separate Battery Cabinets to the UPS Installation Manual 164201408 Rev. P00 Completing the Installation Checklist Installation Checklist for Powerware 9350 30 throughThis Page Intentionally Left Blank Connecting to Powerware 9350 ---80 Battery Connections for a PowerwarePowerware 9350---80 or 160 with Separate Battery Cabinets Completing the Installation Checklist Installation Checklist for Powerware Installing a Remote Battery Disconnect Remote Battery Disconnect Enclosure31.1 N-M 255---275 lb-in Table A. Remote Battery Disconnect Power Terminations Table C. Remote Battery Disconnect Circuit Breaker Ratings Series 685 / 1085 Configurations Appendix a --- Customer InformationIntegral Tool Size Torque Battery Cabinet UPS Cabinet 375 200 Type Series 685 Battery Cabinet TOP View Series 1085 Battery Cabinet Series 1085 Battery Cabinet plan TB1 164201408--4 This Page Intentionally Left Blank