Powerware 1085 installation manual Separate Installation of Series 685 Battery Cabinets

	Back of	Two small brackets go here
Back of		(see detail at left)
Battery Cabinet #1	Battery Cabinet #2
Screw from kit	Screw from kit
	Bracket from kit

Existing Screw Screw from kit

Bracket from kit

	Front of	BATTERY	BATTERY
Front of		CABINET #1	CABINET #2
Battery Cabinet #1	Battery Cabinet #2	Large bracket goes here

(see Figure 15)

NOTE: When cabinets are properly aligned, all cabinet doors will be flush with each other.

Figure 14. Placement of Joining Brackets (Two or More Series 685 Battery Cabinets)

Separate Installation of Series 685 Battery Cabinets

1.Remove the right-hand screw from the top door hinge of battery cabinet #1. Align the hole in one flat bracket over this screw hole, and the other hole over the hole in the top of battery cabinet #2. Replace the screw in the hinge, and attach the other end of the bracket by using an M4×10 hex screw from the field kit (see Figure 14).

2.Align the holes in the other small flat bracket with the two holes in the top rear of battery cabinets #1 and #2. Attach each end to its mating hole using an M4×10 hex screw from the field kit (see Figure 14).

Powerware 9350 Series 685 and 1085 Auxiliary Battery Cabinets	21
Installation Manual 164201408 Rev. P00 053002