Installing a Remote Battery Disconnect
The remote battery disconnect is crated separately for shipping. It is enclosed in a box and is designed to be wall mounted on a surface that can support the
weight and bolt pattern described in this chapter. You can install a remote battery disconnect anywhere between the remote DC supply and the UPS, according to national and local codes. Figure 20 shows the remote battery disconnect enclosure.
SIDE
FRONT
ON
OFF
Figure 20. Remote Battery Disconnect Enclosure
The breaker switch on the remote battery disconnect should be set to ON for normal UPS operation when DC power is available at the UPS. When service personnel are performing maintenance on the UPS or battery cabinet, the switch should be OFF.
|
|
|
Powerware 9350 Series 685 and 1085 Auxiliary Battery Cabinets | 33 | |
Installation Manual 164201408 Rev. P00 053002 |
|
|