Powerware 685 installation manual Separate Installation of Series 1085 Battery Cabinets

Back of	Back of	Two small brackets go here
Battery Cabinet #1	Battery Cabinet #2	(see detail at left)
Screw from kit	Screw from kit
	Bracket from kit

Existing Screw Existing Screw

	Bracket from kit BATTERY	BATTERY
	CABINET #1	CABINET #2
	Large bracket goes here
Front of	Front of	(see Figure 17)
Battery Cabinet #1	Battery Cabinet #2

NOTE: When cabinets are properly aligned, all cabinet doors will be flush with each other.

Figure 16. Placement of Joining Brackets (Two or More Series 1085 Battery Cabinets)

Separate Installation of Series 1085 Battery Cabinets

1.Remove the right-hand screw from the top door hinge of battery cabinet #1. Align the hole in one flat bracket over this screw hole, and the other hole over the hole in the top of battery cabinet #2. Replace the screw in the hinge, and attach the other end of the bracket by using an M4×10 hex screw from the field kit (see Figure 16).

2.Align the holes in the other small flat bracket with the two holes in the top rear of battery cabinets #1 and #2. Attach each end to its mating hole using an M4×10 hex screw from the field kit (see Figure 16).

Powerware 9350 Series 685 and 1085 Auxiliary Battery Cabinets	23
Installation Manual 164201408 Rev. P00 053002