Powerware 1085, 685 Connecting to Powerware 9350 ---80, Battery Connections for a Powerware

Connecting to

Powerware 9350 ---80 and 160

This chapter will explain how to electrically connect your battery cabinets to your Powerware 9350---80 or 160 UPS.

Figure 18 details the Battery cabinet DC connections and control wiring connection point in a Powerware 9350---80 UPS. Figure 19 details the same connections in a Powerware 9350---160 UPS.

NOTE: See Table C in Appendix A for sizing wire for separate battery configurations.

There are no battery cabinet-to-UPS mechanical attachment requirements for this type of system. However, individual battery cabinets should be attached and grounded to each other. Please refer to later sections of this chapter for instructions on these procedures.

CUSTTB terminal block for control wiring. Mounted to inside top of cabinet.

DC INPUT from battery to UPS (E4, E5)

Figure 18. Battery Connections for a Powerware 9350---80

Powerware 9350 Series 685 and 1085 Auxiliary Battery Cabinets	29
Installation Manual 164201408 Rev. P00 053002