Raise-Lower System
This saw uses a
♦Level frame prior to service to get an accurate reading.
♦Check oil level daily.
♦Fill the reservoir half to
♦Use
| Depth Stop Valve |
Lift Pump | 2 |
Reservoir |
|
| 3 |
Lift |
|
Pump | 1 |
| |
Depth Stop | 4 |
Cylinder | |
| 5 |
Hydraulic |
|
Manifold, |
|
Lowering |
|
valves |
|
Lift Cylinder |
|
Fig. 39 — Raise-Lower System
Raise/Lower Troubleshooting
If your new saw begins lowering all by itself when you release the Raise button,
the problem may be caused by debris in the hydraulic line which is blocking the
Lower valve in the open position.
56