The drive wheels are aligned by adjusting the entire rear drive assembly:
1.Loosen the Transaxle Attachment Bolts just enough to move the Transaxle
—do not completely loosen the bolts.
2.Loosen and tighten the Alignment Jackscrew nuts to move the Transaxle
—and thus the wheels — in the appropriate direction to achieve the desired alignment distance (see Fig.44).
3.Lock down the Transaxle Attachment Bolts when the appropriate alignment distance is set.
Pivot Side | Adjustment Side |
Alignment
Jackscrew
Pivot Side Attachment Bolts
Adjustment Side Attachment Bolts
Fig. 46 — Drive Wheel Alignment Bolt Locations
63