Grizzly G0605X, G0606X owner manual Extension Table Inventory, Outfeed Table Inventory

Extension Table

Inventory

Box Contents: (Figure 9)		Qty
A.	Extension Table	1
B.	Lower Shelf	1
C.	Shelf End Plate	1
D.	Support Legs	2
E.	Lower Shelf Brackets	2
Hardware and Tools (Not Shown):		Qty
•	Cap Screws M8-1.25 x 25
	(Rear Rail/Cabinet/Ext. Table)	8

•Flat Head Screws M8-1.25 x 25

	(Front Rail/Cabinet/Ext. Table)	8
•	Flat Washers 8mm
	(Front Rail/Ext. Table/Rear Rail)	6
•	Hex Nuts M8-1.25
	(Front Rail/Ext. Table/ Rear Rail)	6
•	Lock Washers 8mm
	(Rear Rail/Ext. Table)	8
• Hex Bolts M6-1 x 12
	(Brackets/Cabinet/Legs)	4
•	Hex Nuts M6-1
	(Brackets/Cabinet)	2
• Feet 3⁄8"-16 x 2 (Legs)		2
• Phillip Head Screws M6-1 x 12
	(Ext. Table/Legs/End Plate)	12
•	Flat Washers 6mm
	(Ext Table/Legs/End Plate)	16
• Hex Nuts 3⁄8-16 (Feet)		2
• Flat Washers 10mm (Cabinet)		2
• Hex Bolts M10-1.5 x 25 (Cabinet)		2

A

E D

B

C

Figure 9. Extension table components.

-16-

	Outfeed Table
	Inventory
Box Contents: (Figure 10)		Qty
A.	Outfeed Table	1
B.	Lower Shelf	1
C.	Shelf End Plate	1
D.	Support Legs	2
E.	Lower Shelf Brackets	2
Hardware and Tools (Not Shown):		Qty
•	Flange Bolts M8-1.25 x 16
	(Rear Rail/Ext. Table)	2
•	Hex Nuts M8-1.25 (Rear Rail/Ext. Table) .. 2
•	Hex Bolts M6-1 x 12
	(Brackets/Legs/ Cabinet)	4
•	Hex Nuts M6-1 (Bracket/Legs/Cabinet)	2
•	Hex Nuts 3⁄8-16 (Brackets/Legs/Cabinet)....	2
•	Flat Washers 6mm
	(Brackets/Legs/Cabinet)	16

•Phillips Head Screws M6-1 x 12

(Legs/Ext. Table/End Plate)		12
• Feet 3⁄8-16 x 2 (Legs)		2
• Flange Bolts M8-1.25 x 12
(Tube/ Front Rail)		9
	A
E	D
	B

C

Figure 10. Outfeed table components.

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them; or for the sake of expedi- ency, replacements can be obtained at your local hardware store.

NOTICE: Some hardware/fasteners on the inven- tory list may arrive pre-installed on the machine or related components. Check these locations before assuming that any items from the inventory list are missing.

G0605X/G0606X Extreme Series 12" Table Saw