Woodstock W1813 manual Jklg

N(/(*(/Fg\e<e[N`[\9\ckJXe[\i

-% Lift and move the sander assembly into position over the cabinet stand so that the mounting holes line up (see =`^li\j0Æ(').

.% Secure the sander assembly to the cabinet stand with the four M8-1.25 x 25 hex bolts and 8mm flat washers.

/% Open the sanding belt access door on the left side of the machine, and remove the red shipping brace securing the sanding drum to the conveyor assembly (see =`^li\(().

J<KLG

Only use a forklift rated for at least 750 lbs. that is in good working condition. Use assistants to steady the load when lifting and moving the sander assembly. If the sander assembly should tip or fall, serious per- sonal injury and property damage could result.

=`^li\0% Sander assembly mounting points

on left side.

=`^li\('% Sander assembly mounting

points on right side.

Shipping Brace

=`^li\((% Shipping brace.

-14-