Woodstock W1813 manual `iGi\jjli\JX\kp Jn`kZ

N(/(*(/Fg\e<e[N`[\9\ckJXe[\i

8`iGi\jjli\JX]\kp Jn`kZ_

The sanding motor safety brake and the sanding oscilla- tion system require at 57–60 PSI of air pressure connected to the machine to operate. The air pressure safety switch (see =`^li\*)) measures the amount of air pressure flow- ing into the machine. If the air pressure is not adequate, the air pressure safety switch will not allow power to flow to the sander.

The air pressure safety switch was calibrated and set at the factory and should not require any further adjust- ment. However, we recommend that you verify the set- tings.

The red pointer on the sensitivity scale should be set at "0" on the scale, which is adjusted with the sensitivity adjustment screw shown in =`^li\*). The minimum air pressure scale on the right of the scale window should read 4kg/cm2, which is adjusted with the adjustment screw on the top of the switch.

Sensitivity Adjustment Screw

Minimum

Air Pressure

Adjustment Screw

& Scale

Sensitivity Scale

=`^li\*)%Air pressure safety switch.

The safety devices on this machine are there for your safety. DO NOT operate this sander if any safety device is dam- aged or is not operating correctly. Oth- erwise, serious personal injury could result.

J<IM@:<

-34-