Woodstock W1820, W1819 manual Efe$Kifl Kifl Lkj, Kifllkj

FG<I8K@FEJ

	Df[\cN(/(0&N(/)'D]^%J`eZ\('&('
Efe$K_ifl^_K_ifl^_
:lkj
	;XdX^\ kf pfli \p\j# cle^j# Xe[ \Xij
Efe$K_ifl^_:lkj	Zflc[ i\jlck ]ifd lj`e^ k_`j dXZ_`e\
	n`k_flk gifg\i gifk\Zk`m\ ^\Xi% 8cnXpj
A non-through cut is a sawing operation where the blade	n\Xi jX]\kp ^cXjj\j# X i\jg`iXkfi# Xe[
does not protrude above the top face of the wood stock,	_\Xi`e^gifk\Zk`fe[li`e^fg\iXk`fe%
as shown in =`^li\*..

Examples of non-through cuts include dadoes and
rabbets. Non-through cuts have a higher risk of injury
from kickback because the spreader and blade guard
must be removed. When making non-through cuts with a
standard blade, the riving knife MUST be installed. When	=\eZ\
making non-through cuts with a dado blade, extreme
care, including using multiple light passes must be used,	JXn9cX[\
because the blade guard cannot be used.	Nfibg`\Z\
K_\]fccfn`e^efe$k_ifl^_ZlkjXi\[\jZi`Y\[`ek_`j
dXelXcfek_\gX^\jefk\[Y\cfn1

›	Dado Cutting:GX^\++
›	Rabbet Cutting:GX^\+.
›	Resawing: GX^\+0
				\*.. Example of a non-through cut.
		=`^	li

K_ifl^_:lkj
A through cut is a sawing operation in which the
workpiece is completely sawn through, as shown in =`^li\					=\eZ\
*/. Examples of through cuts are rip cuts, cross cuts,
					JXn9cX[\
miter cuts, and beveled cuts. The blade guard assembly
		Nfibg`\Z\
MUST be used when performing through cuts.
K_\]fccfn`e^k_ifl^_ZlkjXi\[\jZi`Y\[`ek_`jdXelXc	
fek_\gX^\jefk\[Y\cfn1
› Ripping:GX^\+'
› Crosscutting:GX^\+(
				^li\*/% Example of a through cut
		=	`
› Miter Cuts:GX^\+)				ade guard not shown for illustrative
		(b	l
› Blade Tilt & Bevel Cuts:GX^\+*					clarity).

-32-