Omron ZS-MDC user manual Setting Flow, Installation and Connection

Section 3 SETUP

Section 3

Setting Flow

	Setting Flow
Measurementfor
		Installation and Connection	Installation & Connection p.2-2
		Gang-mount Sensor Controller to Multi-	Section 2
Preparation		controller.
		Power ON
Conditions
		information from and operations to be
		Setting the Sensor Controller to obtain sensing information from
Measurement		Set the Sensor Controller to obtain sensing	p.3-14
		performed.
of		Setting Filter Function	Sensor Controller User's Manual,
Setting		Set the filter conditions for processing	Section 3 Setup
		measured information.
		Setting output processing	p.3-16
		Set how measured information is to be	Sensor Controller User's Manual,
		processed for outputting the required values.	Section 3 Setup

Setting the Threshold	Sensor Controller User's Manual,
Set the threshold value for judging measured	Section 3 Setup
values.

Results
	External I/O	Sensor Controller User's Manual,
Output	Set how measured values are to be output.	Section 3 Setup
Setup		After you have made or changed settings,
	Save Setup Data
Save	Save the data you have set.	be sure to save the setup data. All settings
		will be deleted if you turn the power OFF
	Sensor Controller
		without saving the data.
	User's Manual,
	Section 3 Setup

3-2

ZS-MDC

User’s Manual