Omron ZS-MDC user manual Teach Mode, Teaching Direct

Section 3 SETUP

Section 3

About Setup

Key	Measured Value Display	Display Customize Menu
↑ UP key	↑ UP key: Executes trigger input.	The function changes depend-
↓ DOWN key	↓ DOWN key: Executes reset	ing on the settings.
	input.	• Changes numerical values.
		• Changes text.
MENU key	Displays the display customize	Returns to the top of the display
	menu.	customize menu.
SET key	Executes a zero reset.	Applies numerical value settings.
ESC key	Hold down for at least two sec-	Returns to the previous menu.
	onds to cancel a zero reset.	When the top menu is displayed,
		returns to the measured value
		display.

●TEACH Mode

In this mode, the measured value is displayed at all times on the main display. The threshold values are displayed on the sub-display. Which of the HIGH or LOW threshold values is displayed changes according to the setting of the threshold selector switch.

TEACH MODE		TEACH MODE
MENU : TEACHING		: DIRECT IN
	Displayed alternately

Key Operations

Key	TEACHING	DIRECT IN
Function keys	Not used	Not used
← LEFT key	Not used	Selects the digit in the threshold
→ RIGHT key		numerical value.
↑ UP key	Not used	Changes the threshold numerical
↓ DOWN key		value.
MENU key	Registers the measured value	Not used
	when this key is pressed as the
	threshold value.
SET key	Not used	Applies the newly set threshold
		value.
ESC key	Not used	Cancels the newly set threshold
		value.

3-8

ZS-MDC

User’s Manual