Sears 113.197611, 113.197511, 113.197411 owner manual Build Foot Assemblies

8.Put corner bracket in each corner, so edges point up. Attach brackets to long sides of shelf: use two screws per bracket (insert screws through shelf); on end of each screw put washer, then nut, and wrench tighten. Note: Screws for short sides wilt be in,_tatted later.

Attach Casters (Only Models with Casters; Door Model without Casters: Go to "Assemble Side Panels")

1. Set out:

-four casters

-sixteen v4" diam x v2"long truss head screws

-sixteen v'4"diam lock washers -sixteen v_" diam hex nuts.

2. Attach one caster to each corner brack- et: use four screws per caster (bzsert screws through shelf); on end of each screw put washer, then nut, and wrench tighten.

Build Foot Assemblies

1. Set out:

-two foot boxes -two foot levers -two foot rods -two pin retainers -two grooved pins -two smooth pins -two washers

-two springs

-two leveling feet

-t'our # 10 x _/_"long pan head screws -two _/s" diam hex nuts.

Assembly

Long End of Shelf

\

._,.,_Long End of Shelf

Corner Bracket

!5